This is why I hate NSG transmissions
- Thread starter astjp2
- Start date
It was put on a dyno, so hopefully that was just some syncro material for breakin
Well it’s clicking and howling in 6th, drive it 1/4 mile
It sounds like the only way you're going to get it done right is if you do it yourself. Which is non-trivial for that transmission. But there *are* yootoob videos...
maybe the 727 swap, what sucks is that I already built the skid plate to fit the NSG
On my short drive, pushed in the clutch and it quit making noise, with a short rolling, input side of the transmission. Only makes noise while clutch pedal is out, changes sound in each gear, really bad in 5&6, shifts smooth. Symptoms are different that the other 3 transmissions.
Last edited:
Sounds like bad jackshaft bearings - or whatever those are called in a transmission. Just a relatively un-informed guess.
Ax15 swap if you need to run a manual? I wish the nsg wasn't such a pile, I'd love to have a 6 speed.
Last edited:
No, I would install a 727 that I have, same as a 999 without the solenoids and a slightly higher first gear
Called the number, high gear is now ran by zumbrota gear in Minnesota and the Memphis shop has moved. They said send the videos and it’s still under warranty. Now how to proceed is the next step.
Similar threads
