TJ Steering Shafts and Bearings: What I Know

Yeti08 · Sep 23, 2024

Been chasing steering play for a little while now,

just checked quadratec :https://www.quadratec.com/products/56113_0010.htm

mopar 97-02 lower shaft for over 600 bucks.

i guess I will look at borgenson

Rolled Over Rubi · Nov 13, 2024

Any updates as to what may be the fix for the steering shaft clunking? i just recently experienced this problem back in mid october and its gotten significantly worse.

A_Jeepin_Chaos_Seed · Jul 6, 2025

Kmck2003TJ said:
I accidently bought a lower shaft for a 97-02 TJ to replace my lower shaft on my 03, but I was able to make it work. As you said, the lower end section is about 2 inches too short where it meets the gearbox.
The end that goes into the gearbox is held in the shaft by a metal pin with a rubber bushing. I hammered out the pin and worked out the end piece of my old shaft. Did the same with my new shaft and swapped the longer piece into the new shaft. Replaced the pin and bushing as well and worked beautifully. If you have the time and patience, you can use the cheaper 97-02 lower shaft with this modification.

Do you remember the pin and bushing size you used to do this?

Negreac · Oct 6, 2025

FYI Someone has made a video showing the Borgeson bearing install. Appears to work with OE shafts as well per the comments on the video.

Longwhitejeep · Oct 7, 2025

Negreac said:
FYI Someone has made a video showing the Borgeson bearing install. Appears to work with OE shafts as well per the comments on the video.

That’s what I was wondering when they first came out. If they work with OE shafts. Thanks for the link

Search

Search

TJ Steering Shafts and Bearings: What I Know

Yeti08

Member

Rolled Over Rubi

Member

A_Jeepin_Chaos_Seed

Member

Negreac

Member

Longwhitejeep

TJ Addict

Similar threads