Who makes quality zip ties?

[Stinkbug]

Given that my Jeep is held together by booger welds, cross-threaded fasteners, and zip ties, I want them to be quality zip ties. What I have been finding is junk. What are you using?

 

[Apparition]

https://www.amazon.com/dp/B001DEARGE?tag=wranglerorg-20

 

[mrblaine]

Given that my Jeep is held together by booger welds, cross-threaded fasteners, and zip ties, I want them to be quality zip ties. What I have been finding is junk. What are you using?

Hard to beat T&B single tooth. We use the 14" because they are easier to fish around stuff, you rarely grab one that is too short, and it is easier to stock 2 sizes. We use tons of those and tons of the next size down which I think is the 18 lbs rating, also in 14".

 

[chili_pepper]

Hard to beat T&B single tooth. We use the 14" because they are easier to fish around stuff, you rarely grab one that is too short, and it is easier to stock 2 sizes. We use tons of those and tons of the next size down which I think is the 18 lbs rating, also in 14".

Not to hijack the thread, but on a somewhat related topic, would you guys have a good source for the plastic clips that attach the main harness to the firewall? Like many, I need to replace my disintegrating factory split wire loom tubing and I have a feeling some of those clips might not survive the surgery.

 

[mrblaine]

Not to hijack the thread, but on a somewhat related topic, would you guys have a good source for the plastic clips that attach the main harness to the firewall? Like many, I need to replace my disintegrating factory split wire loom tubing and I have a feeling some of those clips might not survive the surgery.

Not really but they are next on my list. I've started searching and so far, this is very close but I don't understand the multiple stud diameters. We need the M5mm.
https://www.alldataresource.com/Hel...pkPhjwSByKg5lFlBXVnhaItVznEyqDjBoCxIMQAvD_BwE

Again.
https://lightingsupply.com/products...X2UDZprqnVWKkwQnR9OGT-kw3jOpLbbBoChB4QAvD_BwE

 

[mrblaine]

Not to hijack the thread, but on a somewhat related topic, would you guys have a good source for the plastic clips that attach the main harness to the firewall? Like many, I need to replace my disintegrating factory split wire loom tubing and I have a feeling some of those clips might not survive the surgery.

I ordered the box of 100 to see if they work.

 

[chili_pepper]

Not really but they are next on my list. I've started searching and so far, this is very close but I don't understand the multiple stud diameters. We need the M5mm.
https://www.alldataresource.com/Hel...pkPhjwSByKg5lFlBXVnhaItVznEyqDjBoCxIMQAvD_BwE

Again.
https://lightingsupply.com/products/hellermanntyton-157-00418?variant=46652519055641&utm_source=google&utm_medium=organic&utm_campaign=Main National Feed&utm_content=HellermannTyton M5/T5/M6/T6 Stud Mount Tie 7.5 Inch Long 50 Pound Tensile PA66HIRHSUV Black 100 Per Package (157-00418)&gad_source=1&gclid=CjwKCAjw1NK4BhAwEiwAVUHPULBdfg-zJKHWSBhvC1bxIhX2UDZprqnVWKkwQnR9OGT-kw3jOpLbbBoChB4QAvD_BwE

Appreciate the info. I figured if anyone was on it, it would be you.

I ordered the box of 100 to see if they work.

I'd be interested to hear your thoughts once you receive them.

 

[freedom_in_4low]

Can attest to the T&Bs. I've seen them used as supports for double runs of weather tight flexible conduit containing conductors sizes for 600+A service. We were using some longer ones (and probably a different size) and wrapped them twice and never heard of one breaking on the cross country truck ride.

 

[LJGreg]

I ordered the box of 100 to see if they work.

Any feedback on these @mrblaine. I'm building up my list to redo my harness.

 

[gbirk]

Speaking of zip ties, I needed 4 of the ones that attach to the studs on the firewall.
I had to order a bag of 50. If you need a couple hit me up.

These are the ones I got.
https://www.ebay.com/itm/1164167152...pid=5337789113&customid=&toolid=10001&mkevt=1

 

[flyinfish]

Advance Cable Ties (ACT) makes excellent quality cable ties.
https://www.advancedcableties.com/

I get them in person from "Englund Marine & Industrial Supply" although they do ship free over $99.
https://www.englundmarine.com/inet/...gory&department=BA&class=D09&mfg=ADV&refine=Y

 

[mrblaine]

Any feedback on these @mrblaine. I'm building up my list to redo my harness.

No, they cancelled my order.

 

[gbirk]

Any feedback on these @mrblaine. I'm building up my list to redo my harness.

Post in thread 'Who makes quality zip ties?'

Jan 15, 2025

Speaking of zip ties, I needed 4 of the ones that attach to the studs on the firewall.
I had to order a bag of 50. If you need a couple hit me up.

These are the ones I got.
https://www.ebay.com/itm/1164167152...pid=5337789113&customid=&toolid=10001&mkevt=1

• gbirk

I ordered a bag of 50 off eBay because I needed 4 and my OCD kicked in. They worked just fine. If you need a few I can mail you some. That goes for @mrblaine too.

 

[NDSpeed]

Ty-rap is also another great product
has a metal tip to lock into the cable tie
18lbs looks like the lowest rating.

might be a part of the T&B if it stands for thomas and betts

 

[L J]

Ty-rap is also another great product
has a metal tip to lock into the cable tie
18lbs looks like the lowest rating.

might be a part of the T&B if it stands for thomas and betts

I bought a 1000 piece bag each of the T&B 50 lb and 120 lb ties on Ebay for a decent price.