What have you 3D printed for your TJ?
- Thread starter chimmike
- Start date
Also shrinks less.You'll probably like the ASA-GF as well.
I have not tried that one. I'll have to add a roll to my next order. Thanks!
DeltaNu1142
TJ Enthusiast
Nicely done. This panel, fit for small Toyota switches from CH4x4, is on my future mod list.
Deleted post and re-posting over on my build thread.... Too many tabs open. lol
I'll be back in a few minutes to post here about OPDA pin I made.
Deleted post and re-posting over on my build thread.... Too many tabs open. lol
I'll be back in a few minutes to post here about OPDA pin I made.
Immortalized forever in my quote
I've decided to prime my oil pump since the engine has been sitting for about a year - and I'm a bit hesitant to just run it since I've had a lifter eat a cam on the Jeep before...
I initially turned the crank and aligned the camshaft ring to the housing with a allen wrench. But - since I have a 3D printer, why not 3D print a solution...
So I create this option that would drop down from the top:
But I didn't love it because the hole in the housing is larger than the hole in the ring - so there's slope (degrees of movement) when coming from the top with any 'holder'.
So I remembered I had a Crown OPDA new in-box in the basement as a 'just in case' part. So I pulled the alignment tool from that and drew up a copy in Fusion 360.
Printed it in PLA and the 'arms broke off almost immediately.
So I re-printed in ABS-GF:
Installed:
I've removed and re-installed it twice and it's holding it's shape ok. I Still want to see if I can add a little more thickness to the arms while still allowing them to bend to get into the OPDA ring.
So a V3 on the way. I also want to try to print PETG-HF as the GF adds a good bit of texture that I don't love on this copy.
Once I get a version I'm happier with - I'll post over on the 3D prints file share thread.
I initially turned the crank and aligned the camshaft ring to the housing with a allen wrench. But - since I have a 3D printer, why not 3D print a solution...
So I create this option that would drop down from the top:
But I didn't love it because the hole in the housing is larger than the hole in the ring - so there's slope (degrees of movement) when coming from the top with any 'holder'.
So I remembered I had a Crown OPDA new in-box in the basement as a 'just in case' part. So I pulled the alignment tool from that and drew up a copy in Fusion 360.
Printed it in PLA and the 'arms broke off almost immediately.
So I re-printed in ABS-GF:
Installed:
I've removed and re-installed it twice and it's holding it's shape ok. I Still want to see if I can add a little more thickness to the arms while still allowing them to bend to get into the OPDA ring.
So a V3 on the way. I also want to try to print PETG-HF as the GF adds a good bit of texture that I don't love on this copy.
Once I get a version I'm happier with - I'll post over on the 3D prints file share thread.
I actually used your quote bc I thought I had copied the text to re-post in my build thread but it didn't grab on the PC clipboard.
Couldn’t find a stock speaker cover so I made my own with a silly design for my 2y/o. So far it’s much noticeable to have the speakers up here.
Good & necessary details about the 2yo - you get a 'good dad' pass.
Did you print with something that will take the sun heat (not PLA)?
Good & necessary details about the 2yo - you get a 'good dad' pass.
Did you print with something that will take the sun heat (not PLA)?
Yes, I did ASA
Interesting video showing how he used a 3D scanner to create a model, 3D printed it and turned it into a mold for carbon fiber.
Not for on my Jeep but to the betterment of my tools to work on the Jeep...
I printed parts to create a dust collector for an upcoming sandblasting cabinet to use for Jeep parts.
Details in this link on the forum:
https://wranglertjforum.com/threads/work-bench-garage-version-2.74283/post-1795594
I printed parts to create a dust collector for an upcoming sandblasting cabinet to use for Jeep parts.
Details in this link on the forum:
https://wranglertjforum.com/threads/work-bench-garage-version-2.74283/post-1795594
I've been looking at the P1S since I'd like something enclosed.
https://us.store.bambulab.com/products/p1s
A co-worker has the A1 (I think) and hasn't had anything bad to say about it.
Similar threads
South Carolina
3D Printed Accessories & Aftermarket Parts
