Upper Front Savvy Control Arms

[JeepKub]

I have access to a free set of upper Front double adjustable aluminum arms that I would like to repurpose to another location on my Jeep. Can I take the fork end (axle end/no joint) out and replace with a new JJ end and just use in the upper rear? Am not aware of the center section lengths and thought someone might know off hand.

 

[Chris]

I think you should be able to do that, yes. Aside from the forks on the front upper arms, I believe the lengths of the tubing itself are the same in the front and rear.

Hopefully someone will confirm or deny this.

 

[JeepKub]

Thanks Chris for the quick response.


Sent from my iPhone using Tapatalk

 

[TJDaveX]

The body certainly looks the same on mine. I'd go measure, but it's a little late to be crawling around under the Jeep!
Keep in mind, you would have to order the JJ ends with the correct regular or reverse threads. I forgot which threads the upper front fork side has. Savvy sells both JJ ends, and I am sure they could tell you which one you would need.

 

[TJDaveX]

I forgot to mention that you would only be able to use them for the rear uppers. The lower arms are bigger.

 

[JeepKub]

I forgot to mention that you would only be able to use them for the rear uppers. The lower arms are bigger.

Thanks for those reminders!


Sent from my iPhone using Tapatalk