Steering Wheel Column Trim

[Laws8665]

Does anyone have any ideas where I can get replacement steering wheel column trim? The top piece is terrible faded and the bottom piece is destroyed from an incident with a rogue hobo attempting to hotwire it. I've attached a couple of images, and here are the numbers on the parts: 5FV76TRMAC, 5FV71TRMAC.

 

[WestCoastDan]

Coincidentally, there is another TJ being parted out on the forum today...
This might be your chance to find what you need.
https://wranglertjforum.com/threads/2004-part-out.83054/unread

 

[JMT]

eBay
Davey’s Jeeps

 

[LakeBeard]

is this the part?
https://www.ebay.com/itm/1163738758...pid=5337789113&customid=&toolid=10001&mkevt=1

 

[gbirk]

I just placed an order for a knee bolster form Davey's Jeeps. Good communication, fair price and the part looks great.

https://daveysjeeps.com/

I had to email him what I was looking for and he got right back to me with pictures and a price.

 

[MikekiM]

Mine were looking badly faded.
Had them dyed factory Agate. Also did the door panels on both the full and half doors.

 

[chili_pepper]

Had them dyed factory Agate

Wish I could find a shop that does this in my area. Searches for plastic dying have come up empty.

 

[MikekiM]

Wish I could find a shop that does this in my area. Searches for plastic dying have come up empty.

Door panels or other interior bits? If you want to box them up and ship them to me I'd help you get them done. The shop I use is outstanding.

Full doors were the first trim pieces I had dyed. They still look as good as they did when I had them done a few years ago.

 

[chili_pepper]

Door panels or other interior bits? If you want to box them up and ship them to me I'd help you get them done. The shop I use is outstanding.

Full doors were the first trim pieces I had dyed. They still look as good as they did when I had them done a few years ago.

I purchased a set of half doors last summer and the door cards are looking a bit ratty. I could paint them but I feel like having them dyed would be a more durable solution.

 

[MikekiM]

I purchased a set of half doors last summer and the door cards are looking a bit ratty. I could paint them but I feel like having them dyed would be a more durable solution.

I have zero regrets and would absolutely do it again. I've hit them with my watch, the clasp on the watch, my foot, countless packages, brief case, backpack... Not a single scratch.
Happy play middle-man if it helps. You could call the shop to discuss and then send the skins to me. I'll take care of drop off and pickup and can be your eyes when they are done...

 

[jjvw]

03-06 is the same as the PT Cruiser including the MFS, which make me wonder if the older Neon has the same part as the early TJ because they also use the same MFS.

 

[DeltaNu1142]

Is it this one? Yours for the cost of shipping if you need it.

 

[chili_pepper]

I have zero regrets and would absolutely do it again. I've hit them with my watch, the clasp on the watch, my foot, countless packages, brief case, backpack... Not a single scratch.

I'm thinking paint would be showing some blemishes if put through the same.

Happy play middle-man if it helps. You could call the shop to discuss and then send the skins to me. I'll take care of drop off and pickup and can be your eyes when they are done...

I sincerely appreciate the offer. I may hit you up with some additional questions in a PM later, rather than hijack the OP's thread anymore than I already have.

 

[BrownBear]

does anyone know the length of the 2 screws that hold the steering column cover halves together?
These screws on my 2002 were missing when I bought it.

 

[BrownBear]

does anyone know the length of the 2 screws that hold the steering column cover halves together?
These screws on my 2002 were missing when I bought it.

Disregard…… I used (2) 1.5” drywall screws.