Rubicon Locker dash lights

[06melanore]

Ok so I have an 06 lj rubicon. It has a 44 and 9inch with detroit lockers. No pumps or wires going to axles. I have pulled relays and offroad fuse and still have the locker lights flashing. What do I need to do to disable the flashing lights? Thanks

 

[JKP]

Try pulling up on the locker switch. Somebody may have pressed it.

 

[06melanore]

I've done that. Also unplugged the switch. Still flashes. About to pull the bulbs lol

 

[JKP]

Probably the easiest way.

The cluster logic flashes the lights when the locker state does not equal the state requested by the dash switch. In theory they should go off by pushing the switch once or twice, or by pulling up on the switch. 3 states: both unlocked, rear locked, both locked.

 

[06melanore]

Is there maybe a way to go to the plug at back of switch and tie certain wires together?

 

[JKP]

Pull up on switch. Still flashing?

Try pressing the switch once. Still flashing?

Press the switch again.

That's all 3 possibilites.

If that doesn't get it to go off, there's probably something going on with the wiring that went to the axle sensors.

The cluster compares the switch request to the axle sensors, which of course aren't there.

 

[John Cooper]

Easy fix.. black tape. Just sayin

 

[TheBoogieman]

Easy fix.. black tape. Just sayin

That works well for check engine lights too.

 

[John Cooper]

That works well for check engine lights too.

Yes it does!