Power Steering Leak
- Thread starter DropTopDon
- Start date
Not my Jeep but looks like a marinade injector needle.
https://www.amazon.com/dp/B0912GK2MG/?tag=wranglerorg-20
Yes that’s exactly what I used. Didn’t have a baster so I used one of those. I’m just going to remove the pump and reservoir altogether and get the needle out and flush the system while I’m at it
Good , my suggestion of a magnetic pickup won't work with Stainless Steel. But it might woke with some of that uber quality Chinese Stainless Steel.
https://www.amazon.com/dp/B000RB7AGY/?tag=wranglerorg-20
a claw grabber is what you need
i recently replaced my pump with a psc pump/res and it leaked new at the o-ring between the res and pump. added some blue devil stop leak and it stopped almost immediately.
a claw grabber is what you need
i recently replaced my pump with a psc pump/res and it leaked new at the o-ring between the res and pump. added some blue devil stop leak and it stopped almost immediately.
Power steering pump is leaking at the reservoir again. Going to just pull it apart and replace the o-ring.
Does anyone know the dimensions of the o-ring that seals between the pump and res?
Man you guys are useless, I had to figure it out all on my own. You really need to stop referring to yourselves as internet autists.
The proper size o-ring is 20mm OD, 14mm ID, 3mm thick.
https://www.amazon.com/dp/B08HJMQZHS?tag=wranglerorg-20
The one PSC used looks about 2mm thick. Here's a picture of the difference.
Ickis
Member
Ickis
Member
Similar threads
