New Tool Day

[FarFire70]

Not new but...

I have a bunch of hand drills from my grandpa's shop in Wenatchee.

This is the smallest. Craftsman 1071. The handle had something rattling inside, and the googlz said it was drill bits

Sure enough

View attachment 634411View attachment 634412

View attachment 634410

Display them in the garage.

I have a few tools from my grandfather and I did the same - found a spot to put them out. They didn't belong in a drawer.

 

[CMBD]

Display them in the garage.

I have a few tools from my grandfather and I did the same - found a spot to put them out. They didn't belong in a drawer.

Probably do something with them in my office.

The garage is a shop and I dont have anywhere for it

 

[CMBD]

Two more.

First one is 18" long, ratchet setting, 2 speed, and a plate to push on it with your body. Takes square drive bits that I also have.

Second one ratchets in both directions and has a fixed setting.

 

[OldBuzzard]

Yesterday, @Chris posted this frame sprayer (in Off-Topic):
https://wranglertjforum.com/threads/salt-shift.86581/
https://www.saltshift.com/en-us/products/salt-shift-chassis-flush
A $79 spray head with 6 nozzles and 6 neodymium magnets to hold it against the frame.

Which gave me an idea.

 

[lBasket]

Two more.

First one is 18" long, ratchet setting, 2 speed, and a plate to push on it with your body. Takes square drive bits that I also have.

Second one ratchets in both directions and has a fixed setting.

View attachment 634644

View attachment 634645

View attachment 634646

No batteries? @Apparition fuming rn

 

[Danarch]

Nothing exciting, picked up some wobble extensions. The exciting part is an employee put 40% off on the wrong stuff so I ended up getting them for 40% off.

 

[John Cooper]

Ran down to HF to pick up these, since they just got them back in stock.

I got the large and medium boxes for $71.80.

1/2 Dewalt impact fits just fine, as does the 1/4 Dewalt impact. Plenty of room for pliers, and screwdrivers.

They lock together and will get their first test this coming weekend when we ride Coalmont again.

 

[ColoJeep]

Ran down to HF to pick up these, since they just got them back in stock.

I got the large and medium boxes for $71.80.

1/2 Dewalt impact fits just fine, as does the 1/4 Dewalt impact. Plenty of room for pliers, and screwdrivers.

They lock together and will get their first test this coming weekend when we ride Coalmont again.

View attachment 638387

Are they waterproof ?

 

[Rickyd]

Ran down to HF to pick up these, since they just got them back in stock.

I got the large and medium boxes for $71.80.

1/2 Dewalt impact fits just fine, as does the 1/4 Dewalt impact. Plenty of room for pliers, and screwdrivers.

They lock together and will get their first test this coming weekend when we ride Coalmont again.

View attachment 638387

I have some of those. My only complaint was the tabs that lock them together being tough to move after a while.
And don't leave the lids unlatched or you can break the latches off!

 

[John Cooper]

Are they waterproof ?

Yes and they float too

 

[John Cooper]

I have some of those. My only complaint was the tabs that lock them together being tough to move after a while.
And don't leave the lids unlatched or you can break the latches off!

Thanks for the info!!!!

I'm not saying their Milwaukee, but I know Milwaukee for the rolling bottom, the large, medium, small and backpack is minimum of $500.00.

You can get all of the Bauer for less than half that.

 

[ColoJeep]

Yes and they float too

Sweet ! , now you have a way to shore , before the Zodiac boat is sent out !

 

[Danarch]

Yes and they float too

Looks like you needed floatable tool boxes! I assume you know from experience?

 

[red02tj]

Ran down to HF to pick up these, since they just got them back in stock.

I got the large and medium boxes for $71.80.

1/2 Dewalt impact fits just fine, as does the 1/4 Dewalt impact. Plenty of room for pliers, and screwdrivers.

They lock together and will get their first test this coming weekend when we ride Coalmont again.

View attachment 638387

Looks good.
I need a slim under rear seat box for my “always in the jeep” sockets and hand tools and then something slim and vertical that fits in the trunk for the extra trail ride tools.

 

[John Cooper]

Looks like you needed floatable tool boxes! I assume you know from experience?

Oh yeah......

 

[Danarch]

Oh yeah...... View attachment 638506

How bad was the inside flooded? When I had my YJ within about 3 months of being brand new I got stuck in a river. Made my poor mom keep her foot on the gas while my dad and looked for something to winch too. In between all that the river picked up the rear end and moved about 18” and then was able to drive right out. The entire inside was flooded, water was just flowing over the top of the door jamb. Didn’t cause any damage.

 

[John Cooper]

How bad was the inside flooded? When I had my YJ within about 3 months of being brand new I got stuck in a river. Made my poor mom keep her foot on the gas while my dad and looked for something to winch too. In between all that the river picked up the rear end and moved about 18” and then was able to drive right out. The entire inside was flooded, water was just flowing over the top of the door jamb. Didn’t cause any damage.

It didn't get to the top of the door jamb. Maybe 3/4 of the way up.

 

[tworley]

A pair of knipex snap ring pliers

 

[tworley]

Wrenches for the jam nuts on the midarm

 

[John Cooper]

Wrenches for the jam nuts on the midarm

View attachment 638667

I need to order the wrenches for my Metalcloak arms from them.