transfer case

Hi all, I’m hoping I can get some feedback on an issue I’ve been dealing with for some years now. I’ve searched endlessly on all Jeep forums and nothing quite matched my issue. My build: 2001 Jeep TJ AUTO 4.0 4” lift Stock Dana 30 (front) Dana 35 (rear) The issue I’ve been having is every...

Hey guys, need some help with my 05 unlimited rubicon. Well, it’s kind of a rubicon. I got a good price for it because the owner before had changed the axles to standard lj axles. I thought the price was good and it would be a fun project to remake it into a rubicon I guess. Anyways, I recently...

Hey guys. I've got an 06 TJ with the 2.4 and 6 speed. I'm trying to find out what transfer case will fit on the end of my transmission. My current transfer case has a nasty leak out if the tail housing, there's play in the output shaft to the rear wheels, and you can hear something in there...

Anyone have a 2005 version of the 241 transfer case?

Hey Guys, I rebuilt my NP231 a while ago and ever since I rebuilt it it's been VERY difficult to change modes on the transfer case. I have a cable shifter on it now and even still it's not a smooth transition between different ranges. I know on my doubler there is a spring and ball that I can...

Hi All, I am hopping for some advice, especially now when a lot of places are closed. My jeep tj started leaking something a couple of wks ago. At first it was just a little bit but now it is a lot. I put cardboard under it and the leak is about one foot by one foot is size. Due to the virus...

Good morning all, I haven't been able to shift into 4WD since I acquired the Jeep back in September. This is my first 4WD vehicle, so I'm not one that can "feel" when it is or is not engaged. Also, the dash light is not working (I replaced the bulb and ran the test to confirm). Recently, I've...

I have a 2006 LJ and I'm bout to put on a 4 inch suspension lift with 33's. The lift kit recommends a SYE and a CV driveshaft. Would I be able to just use a transfer case drop kit instead? This is the lift kit I'm looking at...

Hello everyone, I just bought my first jeep a few weeks ago and i have noticed a loud growling/whining sound coming from under the Jeep when I give it gas while at higher speeds. It’s a 2004 wrangler sport with the Dana 44 rear end. Has a 6” lift with the drop bracket for the transfer case. I...

Theres this big ol dang metal disc on the outside of my output shaft, past the dreaded dust cover. Not sure what it is or what the name is, but can't get the dang thing off. Before I cause substantial damage trying to get this thing off, does anybody have a clue how to... or even what its...

Today I was changing a transfer case oil I didn't want to remove the skid plate, while I was planning my game plan, I came up with some idea. Cut the empty bottle in half taped a silicone tubing to it and placed it underneath the drain plug. See attached pictures. Still spilled a little bit...

So I'm New to this whole forum thing but I was told that I could get help with issues that I have with my jeep, so here it goes... So I have a 2006 stock LJ Rubicon, and I was driving up my driveway and i shifted into 4HI and shortly after, I put it in neutral and attempted to shift into 4LO...

So I am spending some tie in Colorado and was in 4 low for some time just putting along the trails.. I started going down Imogene trail and my 4 low in 1st isn’t slowing me down at all. It’s making a free spinning noise. Reverse is the same in 4 low, just free spinning. 2nd gear in 4 low seems...

I've been looking through the forums for months and I've been unable to find someone who has the exact same issue as I have. The issue started initially when the vehicle was in 4-wheel drive and occurred much more with the wheels turning. However over time the clunk began as soon as the vehicle...

So my old NP 231 is growling at me after a nice weekend of playing in the woods. Time for a rebuild after a mere 188,000 miles. That said are there any upgrades that should be done or possibly a lower ratio available before I order parts and begin the rebuild? Any input it greatly appreciated!

Took my TJ off road and got in jam and had to be pulled out. Afterwards I had to drive it home in 4 High. When I put it in 2 Wheel, it won't drive, it just grinds. Let me know your thoughts. Transfer case? It's a 4.0 with a 2 inch Rough country lift. No transfer case drop.Thanks.

Doing an engine swap and don't need the factory Ax5 anymore. TJ had about 130k on it when pulled. No issues at all when running it, just upgraded. I'll include the clutch and all of that jazz. I accidentally snapped part of the shifter tower collar when removing (not sure on the exact name, but...

I am looking at a Transfer case for sale and the guy says it is out of an 06 LJ. I am wanting to put a slip yoke eliminator in that one and take my case out of my 06 TJ. should there be any differences between the ma ual and auto transfer case? and I have heard that the LJ have the different...

So I'm doing some major changes to my TJ and one of them being upgrading to the NV3550 (from the Ax5). With that I'll have to put a new TC on the backside of the trans. I was wondering what anyone's thoughts were on the Rubi TC (NV241OR)? I know the ultra low gearing is great to have when...

Hello, I have a 2001 Wrangler TJ with serious frame corrosion. I’m not handy with major repairs so to there’s not much more I can do with it. The skid plate is holding on to the frame by only one side, meaning 3 bolts. So the transfer case is sagging a little. Of course I’m nuts driving it in...