transfer case

PN 619620083883 3/16 steel Skid only $150 pick up only Lakeville, MN.

I'm looking for temporary solutions to reducing vibrations of the 4" lift of my 1997 TJ. I believe it is a 4" rough country lift kit with probably 1" body lift and 3" suspension lift. Would I be able to drop the transfer case more than an inch? I was imagining that the vibrations would reduce...

231J Transfer Case 150k Miles Rubicon Express SYE Kit - Installed 2020 - 10k Miles Rubicon Express Rear Double Cardan Driveshaft - Installed 2020 - 10k Miles Compressed: 15.5" - Extended: 17.5" Rebalanced/Painted in 2022 by Republic Diesel (Louisville, KY) Stock Front Drive Shaft - 150k Miles...

I recently rebuilt a Tera low 4:1 np231 kit, including machining new helical gears, rebuilding the planetary cage upgrading bushings to needle bearings, etc. The end product is essentially a brand new tera low kit minus the minimal wear items like the inner gear and input shaft. My question is...

NP231 with tera-low 4:1 kit dirty but otherwise in good working order. I don't need it as I already have a rubicrawler. 23 spline input, long shaft, will work with the auto trans. Would need to swap input shafts to use with the manual ax-15 trans. Ill let it go for $900 + shipping to a forum...

Recently I finally opened up my transfer case for some much needed maintenance, everything went great till we got to the adapter that bolts to the transmission. While trying to get the bearing out we broke the lip that holds it in and now the jeep sits in pieces. I’ve looked everywhere and can’t...

Hey good day this is not one of my normal post but here I go. I purchased a 1987-06 Jeep YJ TJ XJ MJ NP231 Transfer Case Slip Yoke Eliminator Kit RT24005 brand new for my 2006 Jeep Wrangler TJ X series and I recently installed it, watch couple videos on YouTube to make sure I was doing the right...

Is there a way to check its fill level? It appears to be leaking from the fill plug. I’ll take better pictures, but here’s one from some days ago. I just had the rear end rebuilt and fluids changed at the end of June/beginning of July, among other unrelated work.. Tryin to determine if it...

Hey guys! Needing some of yall's awesome expertise! So here's what happened. Im out wheeling by where I live, nothing crazy but I go into 4WD Low from 4WD High to get up a hill/mound and after I get over it maybe, 10-20 feet later the 4WD light on my dash goes out. When I notice this I come to a...

I’m guessing this is a transfer case leak but I’m not fully sure. Any help is appreciated.

New driveshaft is going in soon and I’m wondering… is this a normal amount of play for the front transfer case output? It only has axial play (in/out). Turn your sound up for the video. Thanks.

Making progress with my TJ. I towed it behind my RV a couple of times, and it behaves well. One thing I am not sure about is the best way to put it into "toad mode" and back. In the manual it says: put in neutral (Auto transmission), put transfer case into neutral, test that car does not move in...

Hi all. I've read around the forums and most people have it the other way around — in my case, the 4wd hi and lo both work great, but 2wd hi isn't working at all. I bought the jeep, 2wd worked on the test drive with the clutch feeling like it was about 95% of the way out (or maybe I am...

I have an 02 Wrangler 2.5L named Jenny. Jenny is stock with not much more done to her except having had her driver's seat swapped with a a Ford Ranger's bench. In the future, the dream for Jenny is to have her turned hybrid w/ a 100kv brushless motor attached somewhere to the drive train so...

So I ran into a issue where my jeep (1998 Tj) would not engage 4wd in a slightly problematic situation. I was trying to tow jetskis offroad on a uphill. To make a long story short, the jeep didn't engage 4wd. The shifter seems to be able to go through all the positions fine, (2H,4H,N,4L) but...

I've got a 97 Wrangler with a 4.0L in it, and haven't had to many issues, but the guy who owned it before me definitely ran it rough. Had a few pieces cracked and the frame certainly has been through a lot, but overall it's been a pretty reliable car. Until recently. I noticed after driving...

Any written instructions or videos that anyone recommends?

Found adjustment bolt, loosened and slid all the way out but grinding when going from 4H to 4L. What am I doing wrong? Instructions say to be in 4L when doing the adjustment. Doesn’t seem like I can slide it out any farther. Photo posted. The clean metal part is where it was.

For sale is a brand new Advance Adapters input shaft for Atlas ll 2-speed. Has 0 miles on it. Input shaft is 21 spline. Came off of brand new atlas manufactured 12/2020. In like new condition. Do not need as I had to convert to a different input shaft for my application. $100 obo

Hello All, I'm trying to discern the location of a leak between tranny and transfer case. Based on fluid level, I'm pretty sure the issue is the transfer case. Thinking of adding dye to help confirm and pinpoint the issue, but want to make sure before I go and make a potentially simple seal...