Novak Conversions Jeep Wrangler TJ engine mounts

Replacing the interior lights of your Jeep Wrangler TJ with LEDs

Just thought I would throw in my results since I decided to go with “warm white” and no one else has a photo.
View attachment 62150
View attachment 62151

The color is pretty much spot on with stock, just much brighter. My only thing is that the HVAC symbols came out more a whiteish-blue than the original color that matched with everything else. Which is weird because the LEDs are the exact same color as the bulbs I pulled out.

What color is the hvac ones ? Cool , Natural , Warm White ?
 
Man, that was two jeeps and seven years ago 😆 I’ll see if I can find my original order.

I ended up sending them back an putting the stock bulbs in.

It’s all good I just came across the thread and it had all I needed . Just now doing it to my Jeep lol it’s about time . Let me know if you find your order . You can pm me on here or just put it here doesn’t matter
 
https://www.superbrightleds.com/578-can-bus-led-bulb-8-led-festoon-44mm-natural-white-4410-nw8-cb

I just reviewed my previous order for my 05 and I believe these are the ones I put in. Recommend a double-check search but these were nice and bright in the pods!

Superbrightleds was my source. Replaced all of the interior with LEDs about 5 years ago. Had to make a couple of changes to light elements in the process, but very happy with the results and no desire to revert to previous technology.
 
  • Like
Reactions: FarFire70
For the footwell lights it says 3, 2 for footwell and 1 for shifter lights. Where is the shifter light in a 2005? Unless this is for a automatic and doesn’t apply to a manual 6speed?
 
BTW, I replaced the shift indicator light in my automatic today with this LED. It wasn't a perfect fit. The LED took a bit of pressure to get into the existing socket. I actually think I pressed pretty hard and twisted which wore off some plastic to make it fit. At one point, I pulled out the cable, the LED detached, and got stuck in the little cavity within that shift assembly. I had to cut a hole in the assembly to get the LED out. After that, I was very careful with making sure the LED didn't get stuck in there again.

IMG_5943.jpg
 
Swapped the cluster, and interior courtesy lights on Friday. Ordered the wrong stuff for the switches and HVAC controls, so going to post an update once I receive those. But the cluster looks a thousand times better!

I ordered my stuff off amazon - will provide links once I finish the HVAC/Switches.
 
  • Like
Reactions: bourbon
Novak Conversions Jeep Wrangler TJ engine mounts