Tworley build

[tworley]

32rh/33.875"/5.13=3053rpm @ 60mph

32rh/33.875"/5.13=3816rpm @ 75mph

I was close! The grimmjeeper Calc won't pull up on my phone.

 

[jjvw]

I was close! The grimmjeeper Calc won't pull up on my phone.

I keep a list to copy/paste from like Jerry does!

 

[zachpeakee]

32rh/33.875"/5.13=3053rpm @ 60mph

32rh/33.875"/5.13=3816rpm @ 75mph

Sheesh, 3k @ 60mph is STEEP.

On the highway, it'll be about as useful as an Amish Buggy...

 

[jjvw]

Sheesh, 3k @ 60mph is STEEP.

On the highway, it'll be about as useful as an Amish Buggy...

Around town it will be fun. Mine is geared even lower right up until overdrive kicks in.

 

[tworley]

Sheesh, 3k @ 60mph is STEEP.

On the highway, it'll be about as useful as an Amish Buggy...

5.13s were the correct choice for the AX15 and dana 30 combo. Now that the 32rh is here, I dont want to go thru the trouble of regearing a 3rd time. It helps the jeep is not a daily driver.

 

[Rickyd]

5.13s were the correct choice for the AX15 and dana 30 combo. Now that the 32rh is here, I dont want to go thru the trouble of regearing a 3rd time. It helps the jeep is not a daily driver.

It should be awesome offroad. No need to commute at 75 in it.

 

[Alex01]

5.13s were the correct choice for the AX15 and dana 30 combo. Now that the 32rh is here, I dont want to go thru the trouble of regearing a 3rd time. It helps the jeep is not a daily driver.

I heard crawl ratio isnt a thing on auto. Just swap out to 3.07 and save some gas $$

 

[JMT]

The jeep is still on jackstands, but I am joining the ever-growing auto swap group on WTJF! I spotted this TJ at the local u-pull&pay and @hosejockey61 graciously picked up the 32rh for me while I was at work.

View attachment 499278

View attachment 499280

I still need a few items and have ordered several parts already. Its all very exciting! To make it work with the savvy ua will be a challenge. Savvy never made a skid setup for the early automatics. From my understanding, its going to require a separate, stand alone cross-member as the 32rh is much shorter in lenth. we'll cross that bridge soon enough though.

Hey! Nice score! This will be fun. I always wanted a 32rh. When I initially read your news I thought, “We could swap axles (Revolution 456 for Revolution 513.” Then I looked closer. You’ve got ARB’s and I’ve got PowerTrax and Eaton. Looking forward to seeing this unfold.

 

[tworley]

Hey! Nice score! This will be fun. I always wanted a 32rh. When I initially read your news I thought, “We could swap axles (Revolution 456 for Revolution 513.” Then I looked closer. You’ve got ARB’s and I’ve got PowerTrax and Eaton. Looking forward to seeing this unfold.

My damn pile keeps growing. I've got a lot on my plate this year for the jeep. Going to be fun though

 

[JMT]

My damn pile keeps growing. I've got a lot on my plate this year for the jeep. Going to be fun though

I've noticed the pile is growing. I'm hoping you will get the time to do it!

 

[tworley]

Some more goodies!

 

[tworley]

Recieved my flex plate stiffener from Team Grand Wagoneer ($14 after shipping) Quality-wise, well it could use some work. It fits the flex plate though.

 

[tworley]

More slow progress, the ram is mounted. The goal is to get it plumbed Wednesday, pull the springs and cycle the axle. Maybe come next weekend I'll be able to take it for a spin.

 

[hosejockey61]

Maybe come next weekend I'll be able to take it for a spin.

You know you just jinxed yourself....

 

[hosejockey61]

Did you figure out what you're going to do for the transmission pan temp sensor bung?

 

[tworley]

Did you figure out what you're going to do for the transmission pan temp sensor bung?

I haven't. Figure I'll cross that bridge when I get there at a later date

 

[hosejockey61]

I haven't. Figure I'll cross that bridge when I get there at a later date

I was going to weld one but am a little bit gunshy after hearing that Blaine prefers to braze them so you don't have to worry about pinhole leaks. We'll see what to do.

 

[Peakbagger]

I heard crawl ratio isnt a thing on auto.

Take it from @jjvw , it's "fascinating."

 

[Mike_H]

I was going to weld one but am a little bit gunshy after hearing that Blaine prefers to braze them so you don't have to worry about pinhole leaks. We'll see what to do.

If you can weld with a torch, you can braze a bung in a trans pan. Brazing is right there between soldering and welding. I did my own.

 

[tworley]

Possible issue. I had forgotten about my fan shroud. It broke years ago. I dont think my ram hoses would appreciate being this close.