This is the aft transmission cooler line fitting on my 2002 with the 30RH. Is there a replacement part number for this quick connect fitting on the transmission, and is there an o-ring that also needs to be replaced on that line? I have seen lots of threads for replacing the both lines, but not threads for just replacing that fitting.
I'm leaking about 1 pint of ATF every 800 miles, and after doing an initial cleaning of the trans/t-case, it seems to be coming from general this area. In the near future I am going to drop the skid plate to replace the park-reverse switch, trans fluid & filter, drive shaft u-joints, transmission mount, install a t-case cable shifter, and clean the area very thoroughly.
I want to replace that fitting while I have the skid plate off. Even if it doesn't turn out to be the source of the leak, I would like to eliminate it as a suspect.
I'm leaking about 1 pint of ATF every 800 miles, and after doing an initial cleaning of the trans/t-case, it seems to be coming from general this area. In the near future I am going to drop the skid plate to replace the park-reverse switch, trans fluid & filter, drive shaft u-joints, transmission mount, install a t-case cable shifter, and clean the area very thoroughly.
I want to replace that fitting while I have the skid plate off. Even if it doesn't turn out to be the source of the leak, I would like to eliminate it as a suspect.
