Nth Degree Mobility Owners Resource Thread

[oldjeepman]

You will need the trans mount and isolators for the belly pan. All J Products should have the isolators, I bought spares from them..

 

[Wildman]

You will need the trans mount and isolators for the belly pan. All J Products should have the isolators, I bought spares from them..

It would be nice if he had the Nth Degree mount but if not why couldn't you make something that would work? Since I had a V-8 swap in mine I had to modify my mount.

 

[Mullet Jeeper]

I’m confident that I can draw a mount up in cad if I have measurements. The previous owners looking around his shop for it though.

 

[Wildman]

Here's the only picture I have of it.

But I was adapting a V-8 auto to mine so it's not going to look like what you need. Here is what's in the PDF.

• Nth Degree Tummy Tucker (non-Rubicon) Installation Instructions

And then it's got these rubber mounts which All J has in stock.

https://www.alljproducts.com/nth-degree

 

[Mullet Jeeper]

Anybody have any dimensions for the manual transmission mount? Even just some guesses on the measurements would be helpful. Thanks

 

[oldjeepman]

Well since I have a 6spd. and the Nth belly pan I will give it a try, just give me a few days. Hopefully I can get you some measurements that will work without dropping the pan.

 

[Mullet Jeeper]

Thank you so much! If I can get one made I will be able to make more. I’d like to manufacture some replacement parts for these old lift kits.

 

[oldjeepman]

Here are some pictures of my nth mount for a manual.

 

[oldjeepman]

I cut the front of the belly pan so I could drain the trans without removing the belly pan.

 

[oldjeepman]

Mullet Jeeper I will dm you the pics with measurements..

 

[Mullet Jeeper]

Mullet Jeeper I will dm you the pics with measurements..

Thanks so much