In search of bolts

[VanWailin]

Good day Everyone. I'm in search of some help, and if i could buy this off someone it would be a big help. I bought my first Jeep, a 2003 Wrangler SE. I know it's a 4 banger, but the price was right. I am assuming one of the previous owners did the timing belt and or water pump and left the bolts on the front of the engine loose or just misplaced. I'm wondering if anyone could help me find one?

Any help would be appreciated. Thank you everyone.
Kenny

 

[mrblaine]

Good day Everyone. I'm in search of some help, and if i could buy this off someone it would be a big help. I bought my first Jeep, a 2003 Wrangler SE. I know it's a 4 banger, but the price was right. I am assuming one of the previous owners did the timing belt and or water pump and left the bolts on the front of the engine loose or just misplaced. I'm wondering if anyone could help me find one?View attachment 633130View attachment 633131
Any help would be appreciated. Thank you everyone.
Kenny

Pitch and length would help.

 

[NDSpeed]

i’ve been to some Napa part stores that have been very friendly, they can help you figure out the correct type of bolt if you bring it in.

if you don’t need that level of help there is the service manual on here that helps break each part down.

 

[VanWailin]

Sorry everyone. 10mm x3 3/4 long thread pitch 1.50

 

[Dylan_See_TJ]

Is that a flange bolt, or a hex bolt with a washer? Not that it matters, probably. if it's metric thread, the correct length will be in millimeters, not inches, so it's probably a 95mm bolt. M10x1.5x100mm then.

https://boltdepot.com/Product-Detai...MI8YuEjcrdjgMVhkb_AR1LvTP5EAQYAiABEgL4iPD_BwE

Maybe one of those with an M8 or M10 flat washer would do the trick.

 

[macleanflood]

Belmetric.com has a lot of metric fasteners.

Deadjeep.com or Davey's Jeep might have or be a able to source some.

-Mac

 

[VanWailin]

Thank you for the support. I appreciate being in the community!!

Kenny

 

[JMT]

Thank you for the support. I appreciate being in the community!!

Kenny

Welcome to the forum!

 

[CJ with a TJ]

Buy something like this, it'll measure your nuts and bolts exactly. One of my favorite purchases...

 

[Dockside]

ACE Hardware here has a go to for any bolt or screw...

 

[VanWailin]

ACE Hardware here has a go to for any bolt or screw...

I was told that too, I took the advice from Dylan and took a shot with boltdepot.com. Thank you again Dockside

 

[Dylan_See_TJ]

I work at an ACE, and we have those sizing gauges CJ w/ a TJ mentioned. They're awesome; I have one in the garage at home too and it makes figuring out what sizes things are that come off the TJ so much easier. My go-tos (other than work) for fasteners are Bolt Depot and BelMetric; I was able to find every bolt in a TJ suspension setup except for the cam bolts for the front lower control arms through the two of them together. Hopefully that one I linked is the right bolt for you; should work out assuming the sizing is correct.

 

[DuckNut]

My first choice is to give ACE a chance. If they don't have it, there is a fastener store a couple miles away - they got everything.

 

[CreepinDeth]

You might get lucky with Ace Hardware, Tractor Supply, or Blains Farm n Fleet

Otherwise the for sure gotos for me are
McMaster Carr
Grainger
Boltdepot
Etc