Gear pattern check

[Chasitek]

The more I adjust this, the more I get confused i understand you don’t want the harsh line. Should I increase pinion depth here or decrease? It’s a dana 30 high pinion. First pic is coast side, second is drive. Is it just the pinion too shallow still?

 

[hear]

I know what I think based on reading every one of these threads that comes up. But since I have to actual expertise I'll just shut up & observe.

What's your backlash at?

 

[Chasitek]

I know what I think based on reading every one of these threads that comes up. But since I have to actual expertise I'll just shut up & observe.

What's your backlash at?

.006

 

[hosejockey61]

You are a bit deep. take out 3-5 thou and re-run.

 

[hear]

You are a bit deep. take out 3-5 thou and re-run.

This is why I didn't offer my amateur opinion. I thought he need to add shims to move the contact further toward the center of the ring gear.

 

[hosejockey61]

This is why I didn't offer my amateur opinion. I thought he need to add shims to move the contact further toward the center of the ring gear.

I really hope the 32rh is as easy as gears are

 

[hear]

I really hope the 32rh is as easy as gears are

The 32RH is *much* easier.