Center High Mount Stop Light Cable

[wkelley70]

Does anyone know where I can get the connecters and grommet for the Center High Mount Stop Light cable. I need to extend my cable and do not want to cut up the stock cable.

 

[machoheadgames]

I’ve looked for those connectors and similar grommets and never found anything before. Anytime I’ve needed to do any work I either sacrifice what I have and make it longer or buy a spare lamp/harness off eBay and hack that one up instead.

 

[Feralkid]

Why don't you want to cut and splice a length of wire in? That's how it's done.

 

[wkelley70]

Why don't you want to cut and splice a length of wire in? That's how it's done.

I hate to do anything to my Jeep that prevents it from being returned to original. If worse comes to worse I will have to do a splice though.

 

[Artsifrtsi]

So you want her to appear to be pure and pristine for the next guy?

 

[Feralkid]

I hate to do anything to my Jeep that prevents it from being returned to original. If worse comes to worse I will have to do a splice though.

It's 20 years old. A lot of original parts are no longer available.

Get some heat shrink butt connectors, a crimper, and some 16 awg wire from amazon and get the job done.

Here's the crimper I use:

https://www.amazon.com/dp/B00Y7M7SG6?tag=wranglerorg-20

Butt connectors:

https://www.amazon.com/Waterproof-E...-Decoration/dp/B0BNXRSMB5/?tag=wranglerorg-20

16 awg wire:

https://www.amazon.com/Ancor-Marine-Primary-Battery-Yellow/dp/B000NUXCB6/?tag=wranglerorg-20

 

[wkelley70]

It's 20 years old. A lot of original parts are no longer available.

Get some heat shrink butt connectors, a crimper, and some 16 awg wire from amazon and get the job done.

Here's the crimper I use:

https://www.amazon.com/dp/B00Y7M7SG6?tag=wranglerorg-20

Butt connectors:

https://www.amazon.com/Waterproof-E...-Decoration/dp/B0BNXRSMB5/?tag=wranglerorg-20

16 awg wire:

https://www.amazon.com/Ancor-Marine-Primary-Battery-Yellow/dp/B000NUXCB6/?tag=wranglerorg-20

You have changed my mind on this. Exposed wiring is kind of a disposable item anyway. I will do the splice. It is not the same as cutting up an OEM fender.