Novak Conversions Jeep Wrangler TJ radiator

Another TJ on 37s thread

I’m good

F4B564DD-EF63-45E0-9F88-A3D1E2F56532.jpeg


328A20E0-49BA-473E-BA4B-11635E1689E4.jpeg


DCCFFFF3-EE7A-47DF-ACBC-E6CEFB4046B6.jpeg


F8739CC4-88F3-49E7-B3F5-353AB644C5C1.jpeg
 
Had to realing the hood. Good now. Cool thing is I actually learned my cell phone abit in this ordeal. Thanks to you guys. Stay safe, rebuild and tomorrow will be better. My kin folk bd neighbors are hurting right this very second from the hurricane Ida
 
I’ll never do another one would I recommend , hats off to you guys. Total? I’ll get with on that but it’s high and that’s no axles. This was fuckin hard man. No shit
 
  • Like
Reactions: suicideking
Never would I do this again. It’s fuckin retarded. This is stupid. You guys were right. And I have t hit driving abs maintenance! Wrong platform . I agree ,,,, now
We tried to warn ya!😆

At least you saw it through, that says a lot about your skill and determination.
 
The 26 rely which is 4 pin and correct for this Jeep DOES NOT WORK LIKE FACTORY. This is after class moleye led swap. There was a thread here I saw about a year ago or so that I can’t find that has the correct relay. Anyone got it? I’ve searched and can’t find it. Led swap out and correct relay to have hazards and blinkers work right. 26 won’t get it and 27 which i use in my Ford trucks is a 5 pin
 
The 26 rely which is 4 pin and correct for this Jeep DOES NOT WORK LIKE FACTORY. This is after class moleye led swap. There was a thread here I saw about a year ago or so that I can’t find that has the correct relay. Anyone got it? I’ve searched and can’t find it. Led swap out and correct relay to have hazards and blinkers work right. 26 won’t get it and 27 which i use in my Ford trucks is a 5 pin
What year are we working with?
 
Blinkers work but not both. Outboard they don’t blink. Running engine it does. Hazards the same. Not cool. I’ve gone through the wiring and that’s not it. Period. It’s the schematic of relay. This is Not the correct relay for this era wrangler.
 
I’d rather put the original in “fast blink” then this. But a dude on here found the right one but I can’t find the thread.
 
For a 99, you pull the bottom out of the relay and cut a trace on the circuit board of the OEM relay to make it work with LED marker, turn, and tail lights. Stu Offroad has the write-up and pic of where to cut. Few sharp digs with a razor knife has always worked for us.
I’ll look, threw that bitch in the trash two days ago. Cousin Rob gonna do some diggin today. Thanks 🙏🏻
 
MTX subwoofer box on order and the American soundbar in white on order. Also magnum powers site loads now so that’s deffinately back on the plate
 
Novak Conversions Jeep Wrangler TJ radiator