suspension

  1. rasband

    (2019-07-23) OME 2” Rear Springs Half Off on Amazon!

    I’ve been watching for the components of a 2.5” lift and found the OME Rear HD Coils for half off ($83 vs $175). https://www.amazon.com/dp/B004P9IIO2/?tag=wranglerorg-20
  2. KennedyLJ

    Help me spend my money

    Hello. This is my first Jeep but this is also the first time I plan on modding a vehicle. I’m trying to get a list on everything I’ll need and just want to double check with the fine intelligent folk here. I want to overhaul all the suspension. I’m looking at getting this here...
  3. Ericshere03

    SOLD 2” Pro Comp Springs (55297 / 55298) Front and Rear

    Have a set of Pro Comp 2” springs that I installed on my TJ, been on for LESS THAN A MONTH! I upgraded to a taller springs, my loss (whoops). They rode good and felt great with my Rancho RS5000x shocks. Pro Comp part numbers: 55297 and 55298 I can ship these on the buyers dime or sell locally...
  4. Schmidty15

    06 Rubicon stock parts

    Hello, I recently did a metalcloak lift to the TJ so I have all the stock components from an 06 Rubi. I've taken off everything is in pretty good shape the sway bar boots are torn but bearings are frim still shocks arnt blown out or anything. Let me know if you need anything. Price is what you...
  5. AshReynolds

    Poly vs rubber suspension bushings

    Hi everyone! This is my first post on the forum and I am a proud owner of a 98’ Jeep TJ Sahara. I bought my childhood dream car almost a year ago. For its age it’s been kept in great condition by the previous two owners but I need some help/advice. After I broke down due to my spark plug...
  6. M

    Possible solution for rear upper shock bolts

    So, as many jeepers before me, I've snapped 3/4 of my rear upper shock bolts on my 05 due to the 13 years of salt water splashes. While researching possible solutions, I stumbled upon this part from Rough Country It is a flag nut for an XJ to replace the welded nuts to make it easier handle. I...
  7. JC97

    Stock suspension replacement

    This seems to be unheard of in the jeep community, but I would like to retain the stock suspension height/setup. I believe after 320k and 17 years its on the list to replace. My question is, what brand would you recommend, and what model or sizes do i need to maintain the stock ride Thanks in...
  8. J

    My 2003 Wrangler feels top heavy

    Hi all. New here but not new to jeeps. Just bought ‘03 Sahara with low miles, no rust. I noticed when I test drove it that it seemed to feel like it was top heavy (like I could flip it easily)/ and didn’t hold the road as tight as with previous jeeps I’ve had. I know it’s know sports car but...
  9. jmess

    Looking for suspension / lift recommendations

    Hi wranglertjfourm, this is my first post here and i need some advice on a future lift upgrade on my 2006 tj X with an auto tranny and the 4.0L. This will be the first mod on this cream puff 44000 mile jeep. I'm looking to put on 33" tires and i need suspension recommendations to comply. I went...
  10. ClevelandBass

    Ball Joints

    Crown Ball Joint Kit including Hardware for Wrangler TJ. Full Front Kit. I had death Wobble and corrected the problem without having to change the Ball Joints. I only opened the Box to check them out and take pictures for this ad.
  11. snk12

    Suspension Question

    I bought my second tj recently. The man I bought it from didn't want to put lift kit on the jeep but still wanted to lift it so he put it on JK coils. (they sit 2in higher). I am looking to swap back to a TJ suspension. If I buy TJ coils and swap out the ones on my jeep (JK coils) to a set of...
  12. mgroeger

    Tightening suspension components and static tire balancing

    History: 2004 LJ - OME 2" lift, 1.25" JKS body lift, JKS upper/lower control arms, track bars and sway bar links, all of which are completely adjustable. The Jeep is in the shop for an alignment and wheel balance. This is a performance shop that deals with 4x4 off road vehicles as well as track...
  13. mgroeger

    My Jeep sings to me and it's crooked...

    Well today is "I've had my Jeep for a week now and I'm blasting the forum with questions day" since this is my third post and a double one at that. LOL. 1st - I've noticed my LJ definitely leans to the left when looked at from the rear. The OME suspension is only 1.5 years old and has less than...
  14. Y

    Jeep TJ feels unstable and pulls to one side

    Jeep TJ feels unstable and pull me to one side. Hello everybody, this is the first time that I write here. Most of the times I read other posts most than I can to fix my jeep problems, but now I don't know what else I can do to fix this. I have a TJ that is pulling me to on side and the...
  15. QPjeeping15

    Bump Steer and wobble diagnosis help

    https://wranglertjforum.com/threads/bump-steer-and-wobble-diagnosis.13388/ I accidentally posted this under the wrong topic. i would really appreciate the help Thank you
  16. M

    Looking for input on lift kits - 2006 Rubicon

    I have a 2006 Rubicon. I just upgraded to BFG 285/75/16 KO2 (kept the stock Moab rims cause I like em!!) but of course, now they rub on the frame rail when I turn hard . Want to put a suspension lift on but nothing too aggressive. My offroad is maybe 20% of use. Would love to soften up the...
  17. Jackson1234

    Looking for new suspension

    I've got a bone stock TJ Sport V6 Auto. My suspension is shot and I am looking for something new to try out. I mainly drive on the road but also get on some easy to moderate trails out here in Colorado usually twice a month. I'm not trying to go for a big lift but am hoping there is an upgrade...
  18. penk

    What's wrong with my front suspension?

    While working on Ole Yeller today ( I'll post the details of what we did on the build thread here: https://wranglertjforum.com/threads/2000-tj-ol-yeller.1791/ ), we noticed that Yeller was leaning slightly to the right. We hauled it up on the lift and looked around. What I'm looking for from...
  19. 4speedhandler

    Clayton front 3 link thoughts?

    im looking at what to do for my front suspension components. the plan so far is to run 3" lift with 37's and high clearance fenders. now i'm debating the clayton 3 link for the front or stock setup with good control arms. anybody have pro's or con's for either option or even other suggestions...
  20. Tillamook Burn

    '06 Rubicon - need more clearance

    My baby and the best person I know is my '06 Rubicon. :) A while back I put a short-arm suspension lift (3.5") on it (SMH....short-sighted I know) and 35's. Stock, it's a great ride but I wanted to tackle some double diamonds out in Tillamook (Oregon). Problem is the housing on the Dana 44 front...