help

Hello all, Absolutely hate that I have to make this post asking for suggestions on my Jeep. Bought it about 2 years ago, Jeep LJ 160k 4.0 automatic. Runs great and drives pretty well. There’s a shitty lift kit that I’m planning on upgrading at some point as well as plenty of other stuff...

I have 2005 tj 4.0 auto keep getting codes p0339 & p0300 I have changed the camshaft and crankshaft sensor, full service change of plugs & oils etc, injector clean and currently have a ignition capacitor on order hoping that would be the weak link. it runs smooth when start up and idling...

Hello all. I got a pair of low profile rock sliders or body guards. I couldn't find an instal video or thread for these particular ones. So my main question is about drilling the holes for the part of the guards that wraps underneath the body. Im attaching some pictures of where the holes are...

So I have a 1998 Jeep wrangler Tj (170,000 miles), and I'm running into a issue after I bought it used. When I got back home, started it up and drove down the road the next morning, there was a higher pitched whine coming from what is sounds like the front end at 35-40mph and above. The pitch...

I have a 1999 Jeep Wrangler 4.0L. When I first purchased the vehicle over a year ago I had replaced all the exhaust on the car. I had replaced the exhaust manifold with the Banks exhaust manifold type version. It wasn't by Banks but an exact design. Then earlier this year it cracked and I had to...

I have an automatic '97 wrangler TJ (chevy swap) with an aftermarket Lokar shifter. The shifter has been finkiy since I've inherited the car. Sometimes when it's in park I'd have to tug on it til I heard a click in order to start the car. After admittedly tugging on it now the car is stuck in...

Hi all, thank you very much with helping me figure out my front steering components the other day, it was greatly appreciated. With that said, I need help figuring out what I need to replace for an appropriate 2 1/2 inch lift, from my current 4 inch lift. I ideally would like to run 31's and...

My TJ isn’t original to me. I’m rebuilding the diff and it had a lunchbox locker and I was just trying to identify what brand it was so I could contact them to order new springs. The ratcheting gears all appear in great condition, little to no wear but a few of the springs look like they...

Hoping someone can help me. I have a 2006 Rubicon with a BoostedTech Eaton M90. It uses a split second FTC-202 with a 7th injector. The issue I am having is that I can’t force it to go into open loop no matter what I do with the HP Tuner. Unless I am at 100% throttle, there is an insane delay...

So I have 35s on my LJ and I just had my hopefully last close call on the highway due to my crappy oem brakes. Anyone have suggestions for brake upgrades? Ive seen black magic brakes and I can’t afford to spend over 1k on that big brakes kit Would getting just these pads and rotors for the...

Trying to put on my bumper, and the holes that line up along the bottom of the frame don’t line up by 1cm. What’s the best way to slightly extend these holes on the bumper so as they all line up? It’s thick steel and a drill doesn’t seem to be doing anything Thanks

I’ve got a 32” UWS toolbox that I’ve been trying to mount in my LJ but I have had some trouble figuring out how. I’ve seen several threads of them mounted in Tj’s but I want to keep my rear seats so I am unsure how I can keep it secure back there while off-roading so it doesn’t bang around and...

Recently my jeep developed a very loud squeak from the front passenger side wheel. The squeak seems to be louder at lower speeds, and it speeds up and slows down with the rotation of the tire. It occurs regardless of brake pressure, and will happen only when I'm turning (direction doesn't...

Hello, so I have been having some issues with my jeep. It usually waits till it’s heated up. It will hesitate and jerk kinda bad, and oddly enough seems like it really does it when I got over bumps in the road. The RMPs don’t drop but the speed does? But I’m not slowing down that much. Like it...

Help! My 1999 TJ had a headlight randomly go out and when I went to change it I realized the wiring was corroded. I have someone who can fix it but I am not sure what part I need to buy as I am not the most knowledged when it comes to wiring parts. I tried researching it but most videos/forums...

I am very new to fixing up Jeeps. I have a 97 that needs new lines. From reading some of the forums I figured out one is an evap line and one is fuel. But I can’t find a replacement anywhere. Unless it is used. I’d really like to find new ones if I can. Rock auto has nothing and weRmopar isn’t...

My Lj has been driving a little off center for a while now and I’m trying to figure out how/where I can fix that. My body faces slightly to the left and my frame drives straight. Do I need to realign the entire body? Anything helps, thanks!

Hello everyone I have been trying to remove the tapered bolt on my steering stabilizer for 3 days now. I finally went and got a pit arm puller but for some reason it will not fit around my steering stabilizer please help. PS I've went through a bottle of PB blaster and I have been hammering it...

So I am looking to replace my body mount bushings because they are about to disintegrate. Just replacing the 3 on each side under the doors. Trying to figure out if these should work for all 6 total bushings I am replacing...

Hi there! I am fairly new to the TJ world, having just bought myself a '98 this past August. I have been doing some saving and research, but am finding myself lost in what tires to get and if I want to lift my Jeep. Right now I have all stock parts (wheels, shocks, springs...everything) and...