help

I recently replaced both front fenders and overhauled my coolant system. However, when I finished I had this piece left over. It looks like a mount for something but I am at a loss. I had everything labeled but this. Some sort of indication would helpful thank you.

Sorry to make a new thread but I didn’t see one that covered this, I have. 2002 wrangler sport and was recently in the passenger side twilight assembly seeing where I could splice in a backup camera wiring harness. After poking around in there and putting everything back together I started up my...

Transmission wont shift anymore. Wife was driving it(she drives a stick well) and taking some girls on a little ride. Was turning left when the transmission wouldnt shift into third gear. She lost some speed so she tried shifting into second and managed to get into second gear. She noticed the...

Question for all. To start with I am new to this at 50 and am looking for meaningful input. I recently bought a 98 TJ with a 4 cyl 5 speed. It is a riot but as most of you know gutless. This winter I am going to tear it down and do some mods and am now stocking the parts to do them. It is...

Hey guys, So excited to be back in the Jeep community. Just picked up a rust-free 2000 Sport 4.0L with 161k. Big improvement from the '97 2.5L I had in high school! Well, hopefully :unsure:. It was running fine, maybe had a slightly rough idle. Took it on an hour test drive and found no...

I’m having this problem with my 1998 2.5 liter TJ where my air will not blow out of any vents. Never had to deal with something like this so I don’t know what is going on. This is a video of what’s happening. It seems like it is recognizing that I’m turning on the air but it won’t actually turn...

Hi All, I posted a while back about recommendations as to why my 97 wouldn't run. A mechanic took a look and diagnosed the camshaft as bad. So, I found a 98 wrangler Tj with a 2.5 and decided that would be a perfect switch. We now have the 98 motor moved over into the 97 frame, all hooked up...

So I recently had a major loss of power in my 04 TJ 4.0L Manual transmission. Pulling out is difficult and accelerating is super slow. I recently cleaned my throttle body, changed spark plugs, changed my MAP sensor (had a Mass Air Flow OBDII code) and I also fixed an exhaust leak a few months...

So I’ve had this problem going on for a while but it’s been off and on. I have 1998 2.5 liter with 72000 miles and the clutch is making a growling noise when idling. When I engage the clutch it goes quite but is still slightly there. It doesn’t have any problems changing gears but the noise it...

So I just picked up a 1997 tj 2.5 auto as a project to try and get it running again, I got it knowing that the trans was blown and got everything together to do the ax15 swap, but before I did the swap, I wanted to hear the engine run so I’m not wasting time. For some reason I’m not getting...

I have a 1999 Jeep TJ 4.0 5 speed. It has idled rough for a while now, it stays at around 800 rpms but it is not a consistent number. It bounces slightly and you can hear the difference as it does this as well, bouncing from around 775 to 850 rpms. It also sometimes has a hard time cranking and...

I recently rewired my 2003 Jeep TJ with a used wiring harness from another Jeep TJ of the same year. The new harness was a factory harness, although it had an aftermarket sentry key module which was hardwired into the harness. I just figured as long as I unplugged the module it wouldn't cause me...

Hello I have to move coming up in February I normally would rent u haul moving truck and pull the jeep behind but that isn't an option this time as the cost is way too high for too afford. I was wondering if my TJ will have trouble towing the u haul 6 x 12 trailer 2040km (1268m). I have an...

Hello I current have a 2005 Jeep TJ with a 4 inch rough country suspension lift. (this kit here... https://www.roughcountry.com/jeep-suspension-lift-kit-907s.html) I have an sye kit and driveshaft. (sye kit ... https://www.quadratec.com/products/52237_98.htm ) driveshaft...

I own a 1997 Jeep Tj with the inline 6, and the automatic transmission. I am running 31's on it right now. I am buying new tires soon but I was also wanting to do a 2" suspension lift since I am buying new tires. I am still planning on sticking with 31's. I am just wondering if there is...

Hello everyone, First I would like to say, im new to posting to this forum but I have read as much as I can on here. So I am also newer to Jeeps as well. Long story short I ended up with a 2004 LJ with about 122k miles on. The guy I bought it from (also I had no clue) did a horrible job with...

Not sure where to put this thread but my girlfriend recently got an Fj because she couldn't afford a JK. lol, I know that's not the answer. I tried to convince her to get a TJ but she says they're too old. Anyway, the Fj forum is crap so I'm going to ask here. I'm getting 3 codes. A P0420...

Hello, I have the PSC kit for my TJ, does anyone on here have PSC or know anything about how the cylinder assist mounts to the front axle/steering. I know the kit comes with the weld on tabs but i don't have them, I can always purchase new ones but some help or advice would be cool. Any...

After searching online for a definitive answer on dropped pitman arms with the Currie Currectlync I’m more confused than when I started. I know that the track bar and drag link should be parallel to get rid of bumpsteer but with my current set up I don’t get any bumpsteer at all. Unfortunately...

Hey guys, I've got an '06 TJ with 4.0, and 6 speed. It's done this odd thing where it cuts out under acceleration since I've had it. It would flash the CEL but never store a code. If I backed out of the throttle, it would continue to run, but if I kept on it, it would die. Over the two years...