Did an LJ delivered with a soft top have the wiring for the hardtop installed? Specifically the wiring at the back and for the switches.
2005 LJ Hardtop Wiring
- Thread starter mudmaster
- Start date
No.
You need the harness that runs from the dash to the back corner and connects to the hardtop.
This doesn't make sense.
You are correct. Posted another link. I know there is a better write up. I keep looking for the write up I used for my hard top wiring. I'll post it once I locate it.
Another Wrangler forums thread
Last edited:
I've just done a bunch of research on my 05 as I am adding an OEM locker switch into my non-Rubicon. If it helps you, here's all the different part numbers for an 05 dash harnesses. I was able to get a 56047312AB (from a Rubicon w/ Hard Top) harness on Ebay for $130 shipped.
GNN = Auto Dim Mirror W/Lamps/Compass/Temp
VJO = Soft Top
VKO = Hard Top
DSE = Rubicon
77 = Short wheel base
78 = Unlimited (long wheel base)
DG0 = All Auto Trans
DBB = All Manual Trans
GNN = Auto Dim Mirror W/Lamps/Compass/Temp
VJO = Soft Top
VKO = Hard Top
DSE = Rubicon
77 = Short wheel base
78 = Unlimited (long wheel base)
DG0 = All Auto Trans
DBB = All Manual Trans
Similar threads
