What did you do to your TJ today?

[MountaineerTom]

I love that winch plate. I wish I had come across it before I got the one I did.

 

[All 4 Wheelin']

All done. Whew.

View attachment 239814

View attachment 239815

Glad you got er done.

 

[Midtenn]

Glad you got er done.

Yeah. The rear track bar isn’t perfect yet. I have the rough country which allows for in vehicle adjustments. However, measurements when on jacks do not correspond to measurements on the ground so it’s an iterative approach.

 

[phraza]

I did mine about 5 years ago..got mine from a radiator specialist in Onehunga.(brass core works really well)

I got mine from Silverdale Radiators. 3 year warranty so will see how it holds up. Just finished installing it, all went well. Waiting for it to cool down to check levels

 

[phraza]

Changed out the split radiator today, took a few hours (I’m not the fastest, like to take my time and poke around while I’m doing it to see how things work)
During:

After:

the hose that goes to the overflow bottle isn’t tight enough for my ocd. So will find a little hose clamp next time I’m out.
Also seen my light under the hood is blown, so will get a new one for there soon too.

 

[downthepines]

Took it out for short ride after looking at it in garage since fall

 

[Brandough]

Fog lights installed

 

[psrivats]

Added TJ #4, or 3.5, to the fleet, err, parts pile? I bought a Dana 30/Dana 35 4.10 axle set with some accessories attached. The axles are intended for the 1998 Sport project. I'll probably keep the windshield frame because 3 black windshield frames isn't enough. The tub is salvageable. The frame is crusty, but solid. The wheels are retro, but I kinda dig 'em.


View attachment 237970

I like those wheels quite a bit. Who made then, you know? What size and backspacing, any idea?

 

[Nightmare9]

Installed and wired my KC Lights !
Not an easy task with a recently broken arm.
Link to the KC Page
https://wranglertjforum.com/threads/ordered-my-kc-flex-era4-lights-today.46818/#post-846411

 

[TheBoogieman]

Taking the Jeep for a ride to check this out today.

2019 Polaris RZR 1000 Highlifter Edition.
Runs Excellent and extremely low miles.
10” Super ATV Lift
8” Super ATV Gen 3 portals
42” BKT Tractor tires
Keller Ball joints all four corners
X300 extended axles with spares .

 

[csaxj3]

That looks like a Tomken winch mount, that is what I have, I like the simplicity of it. I welded a rectangular piece of tubing to the top bar and mounted some rectangular lights to it, sturdy and works well......View attachment 239817

What cable set up did you use for thew winch?

I was going to build a bracket to mount the blue sea disconnect but it might be easier to run disconnect wires like you did.

 

[Midtenn]

Fog lights installed

View attachment 239866

View attachment 239868

What kind did you go with?

 

[Midtenn]

Taking the Jeep for a ride to check this out today.

2019 Polaris RZR 1000 Highlifter Edition.
Runs Excellent and extremely low miles.
10” Super ATV Lift
8” Super ATV Gen 3 portals
42” BKT Tractor tires
Keller Ball joints all four corners
X300 extended axles with spares .

View attachment 239925
View attachment 239926
View attachment 239927

Reminds me of a monster in a kovie

 

[TJim]

Just bought some Old Man EMU springs Light Duty (2932 & 2941) and some Rancho Shocks RS5000x (RS55128 & RS55240).

When I find some time, I will install them on my own to give a 2.5" lift on my 4-cylinder 2.4L TJ.

It about time to let those tires "breath".

 

[Jeep Dude]

Much needed tires, fluids (transmission, transfere case, rear diff). Some fun just because stuff, Bartact "oh shit handles", Rugged Ridge door entry guards and Dirty Dog mesh bikini top

 

[CodaMan]

Nice!

 

[Rubicon88]

Drove it

 

[Weasellee]

M.O.R.E. Dead pedal installed real quick like. Thanks to @Stinkbug Shipped to my door for $30. Best that

Also replaced all 4 fuel injectorO rings. Easy enough once i figured out how to remove the fuel line from the rail Thanks YouTube

 

[Midtenn]

Just bought some Old Man EMU springs Light Duty (2932 & 2941) and some Rancho Shocks RS5000x (RS55128 & RS55240).

When I find some time, I will install them on my own to give a 2.5" lift on my 4-cylinder 2.4L TJ.

It about time to let those tires "breath".

View attachment 239982View attachment 239983

Thanks for sharing. I love seeing Jeeps and signs from around the world.

 

[Fulton_Hogan]

Finished up my phone mount since my Tackform bits showed up. Only wiggly when I hit a decent bump, and if I rest the bottom of the phone on the center stack almost no wiggle at all. Thanks to @Fulton_Hogan For the inspiration!

View attachment 239757

NICE!!
That's very similar to what I wanted to do, but the 2-hole bases were out of stock, or they didn't have the arm I wanted; I don't remember which.
Congrats on the build, looks sweet.