What did you do to your TJ today?
- Thread starter LJRubiconGuy
- Start date
Kiwi TJ
Just asked myself if I’m crazy and we all said No
Supporting Member
Ride of the Month Winner
Raining today and still in lockdown so finished off signpainting my Jerry can...
Kiwi TJ
Just asked myself if I’m crazy and we all said No
Supporting Member
Ride of the Month Winner
As long as your remembered to rewind them all before on selling....No way..!!!
Auto Chrome tape detection...
But...does it have auto song detection and auto side flip..uh ha... that's what I thought....
Boy, I don't really miss those days even though just this week me and the Mrs. just went through all our VHS tapes and audio cassettes and literally took over 100 VHS tapes to the Goodwill... couldn't part with any audio tapes yet....never know when I might want to jam out to REO Speedwagon Hi Infidelity...
After putting it off for 8 years, I took off the ProComp and Fox decals the PO had put on. Loving the cleaner look. Probably gonna throw a tactical US flag on both sides, but for now, it’ll just be blank and shiny 
Still have to touch up the paint, especially on the door hinges.
Still have to touch up the paint, especially on the door hinges.
Last edited:
Great thing,
i am also planning to install a subwoofer under the seat. may I ask where you installed the subwoofer?
I installed a set of Max-Bilt Trail Tail LED Tail Lights and turned out really nice. The lights are biuld and heavy duty and sealed from elements very well. I did have to tap out the two mounting holes on my jeep to clean up and allow their Allen head screws to. Work.
U can buy their "custom" flasher relay for LED lights to slow down the blinker on/off cycle time or search for them on eBay.
On a side note I left my ignition key on in the start position for about an hour. When I can back and opened the jeep door the guages started cycling on there own and jeep would not start. Pondered my wiring of the tail lights may have screwed up something but decided to jump start and all got cleared up after driving it around a bit.
U can buy their "custom" flasher relay for LED lights to slow down the blinker on/off cycle time or search for them on eBay.
On a side note I left my ignition key on in the start position for about an hour. When I can back and opened the jeep door the guages started cycling on there own and jeep would not start. Pondered my wiring of the tail lights may have screwed up something but decided to jump start and all got cleared up after driving it around a bit.
Some small projects that I got the time to do.
Installed auxiliary reverse lights as the stock lights are terrible. The export housing is different to US and even with an led replacement wasn't giving enough light.
And my right side headlight was intermittently working, turned out to be bad wiring. So I got a new connector and soldered it up.
Installed auxiliary reverse lights as the stock lights are terrible. The export housing is different to US and even with an led replacement wasn't giving enough light.
And my right side headlight was intermittently working, turned out to be bad wiring. So I got a new connector and soldered it up.
TJ2
TJ Expert
Slides right under the back seat. It fits great and if you have a aftermarket stereo the install takes no time!
Hunter Rich
TJ Enthusiast
Will be replacing this today.
I did the same thing. The PO had some aftermarket POS stereo in there that the light was always on and bright and annoying. The factory unit looks so nice and clean. Good job!
Hunter Rich
TJ Enthusiast
so I was hoping to not have to do the passenger side also, I'm saving to upgrade rotors, calipers and pads at all 4 corners, but nope the other one is starting g to go also. Off to Orielly's...
ParatrooperJeeper
Member
Pulled the trigger on the Savvy transfer case cable shifter kit. Hopefully get it bolstered up when I get around to the SYE and driveshaft swap.
Oh the suspense.
Similar threads
