I ran some very similar to those on my 1979 IH Scout II back in the early 80's... I like the old school look.
I miss that ride, but sold it for a down payment on a house..
What did you do to your TJ today?
- Thread starter LJRubiconGuy
- Start date
I miss that ride, but sold it for a down payment on a house..
Kiwi TJ
Just asked myself if I’m crazy and we all said No
Supporting Member
Ride of the Month Winner
This is what happens when you try to find that slight rattle coming from under the dash haha
TJ2
TJ Expert
Always dealing with Midwest rust. Today it slows down the locker pump relocation project to derust with MetalPrep and paint over
Well after a 4 hour round trip today I finally got a set of matching half doors and uppers! Needs a little TLC, some mirrors and I need to replace the hinge bushings some time but so far I happy with them!
Went to Home Depot to find something to use for my grab handle I made that the uppers hold in place. Saw the line to get in while I was driving down the road so I made a u turn and went home. Went to the garage and had a look around. Found a couple bolts and washers and now I can take my uppers off and still have my grab handle. 
Replaced the radiator support brace. The old one was pretty gnarly.
I never understood why fog lites went away from amber - anybody know? I always thought the amber color helped (slightly) - if you've ever experienced Tulle Fog in California's central valley at nite, you'll know what I'm talking about! My old MBZ has (stock) amber fogs on it too.
Brian83
TJ Enthusiast
Unboxed this. Waiting for the rest of the parts to come in.
Kiwi TJ
Just asked myself if I’m crazy and we all said No
Supporting Member
Ride of the Month Winner
Congratulations and welcome to the half door brigade
Finally pulled the trigger on an SYE and some adjustable arms. Only took 18 years!
Went with the Advance Adapters kit, Adams driveshaft and Savvy upper rear arms. Only have a 2” lift so I’m hoping to get away with just doing the uppers.
Once I can ditch the t-case drop I’ll install the UCF transfer case skid that’s been sitting in my garage for a year and a half!
My spirit animal, apparently:
Went with the Advance Adapters kit, Adams driveshaft and Savvy upper rear arms. Only have a 2” lift so I’m hoping to get away with just doing the uppers.
Once I can ditch the t-case drop I’ll install the UCF transfer case skid that’s been sitting in my garage for a year and a half!
My spirit animal, apparently:
Did the swap from the transfer shift linkage to cable. Not a hard mod, and I had no adjustments to make. Smooth like butter!
A couple of months ago, I installed an Atoto A6 Pro Android head unit. I liked it well enough, but the UI was dull, and the sound wasn't very good. It lacked any bottom. Today I installed a launcher app from Agama, and the Poweramp app for a music player. More way better. The UI has some pizzazz now, and the player work very well. I've actually got some bass.
I installed one of those upgraded headlight harnesses from K Suspension. We'll see if it makes a difference on my drive to work at o'dark thirty Monday morning. I wasn't too impressed with the strand count on the hot lead. The insulation is thick, leading one to think that it's a heavier gauge wire than it really is. We'll see.
Oh, and I washed it.
I installed one of those upgraded headlight harnesses from K Suspension. We'll see if it makes a difference on my drive to work at o'dark thirty Monday morning. I wasn't too impressed with the strand count on the hot lead. The insulation is thick, leading one to think that it's a heavier gauge wire than it really is. We'll see.
Oh, and I washed it.
Installed the Kenwood stereo I purchased from @Hcwlsu101 (thanks!). I also took the opportunity to remove the extra XM radio bloat the previous owner installed.
Similar threads
