Good lord, is that a droid?
What did you do to your TJ today?
- Thread starter LJRubiconGuy
- Start date
Good lord, is that a droid?
It is, but its not the droid you're looking for.
A month ago I flushed the radiator and put new antifreeze in. Yesterday I walked out to take a ride to town and guess what I found under the Jeep? Yep a big puddle of new clean fresh antifreeze. The pump has bit the dust. New pump is on the way so today I’ll be pulling the old pump off.
Bought the Jeep four years ago with a freshly replaced pump. Wonder what the previous owner put in?
Bought the Jeep four years ago with a freshly replaced pump. Wonder what the previous owner put in?
Not currently. It is the hub and wheel below though. If I remember when I pull the trail cover off next time I'll grab one.
https://www.amazon.com/dp/B005KFG3PG?tag=wranglerorg-20
https://www.amazon.com/dp/B07LCY77SJ?tag=wranglerorg-20
I have the same Kicker sub. Even with the top off and running 65 MPH, it really sounds good.
If I didn't know the post talked about his subwoofer, I was going for "handy campground trash can with stowage ring" at first glance...
Got my brand new Bestop Trektop NX in yesterday after selling the Smittybuilt hard top that was on the jeep when I bought it. Never liked the roof line of that top and prefer the frameless look much more. Now to wait for a good sunny day and a little healing from my minor surgery tomorrow and I'll get it installed.
Also in waiting, have the monstaliner kit to do the floor, need to repaint fender flares, and install wiring harness that came with Toyota lights so I can change to a 100W bulb.
Dang if life don't get busy at times and slow down side projects!!
Also in waiting, have the monstaliner kit to do the floor, need to repaint fender flares, and install wiring harness that came with Toyota lights so I can change to a 100W bulb.
Dang if life don't get busy at times and slow down side projects!!
Mudflat
TJ Enthusiast
Got my brand new Bestop Trektop NX in yesterday after selling the Smittybuilt hard top that was on the jeep when I bought it. Never liked the roof line of that top and prefer the frameless look much more. Now to wait for a good sunny day and a little healing from my minor surgery tomorrow and I'll get it installed.
Also in waiting, have the monstaliner kit to do the floor, need to repaint fender flares, and install wiring harness that came with Toyota lights so I can change to a 100W bulb.
Dang if life don't get busy at times and slow down side projects!!
We love out Trektop NX! Our original top was in good shape, but it was just too difficult to take down & put back up. We had to wait for a really hot day or the fabric wouldn’t stretch enough to put it back. I also like the frameless feature. It’s much sim& looks great.
Mudflat
TJ Enthusiast
At first, I thought you were complaining about the picture quality of my phone. hahaha
Your avatar looks fake too.
It is 100% fake. lol
Pulled the trigger on a pair of genuine mopar outer door handles. Damned things are salty 
Pulled the trigger on a pair of genuine mopar outer door handles. Damned things are salty
I’m no mechanic, but I don’t think that you should be licking them.
I'm not convinced you need to be a mechanic for that one...you may already be qualified...
I'm not convinced you need to be a mechanic for that one...you may already be qualified...
I didn't have any papers to write and I didn't have any papers to grade, so I spent all evening in the carport. Changed oil and spark plugs. Put a couple of trim pieces back on that I left off from when I was fiddling with the resistor a while back. Also finally remembered to tighten up the bolts under the passenger seat from when I replaced the seat cushions an even longer while back. Also bought ball joints for my son's TJ. Gonna work on his Saturday.
18thcenturyguy
Member
So far so good. Benn up for three days. It was in the 70's yesterday and in the sun most of the day, it all stayed up and I think it looks pretty good.
18thcenturyguy
Member
https://www.amazon.com/dp/B0CDPPJJ1B?tag=wranglerorg-20
If I was to do it again I may try a larger piece. They make some board that are like 3 feet by 4 feet. Might be easy. Mine were like 24' by 24" I still have three full sheets left over. Also, I only used 1/2 inch thick, you could try 1" for more insulation. There are a lot of options. This stuff is super light and I think it will stay up with the self adhesive stuff.
Similar threads
