Fender flare seal

[notnsuv]

Anyone use this or similar to seal flare/tub gap?
Bushwhackers had seals but old and dry so looking to replace while the wideass flares are off. Nursert heads cause a gap and I'll have one with the Savvy sliders also.
https://www.amazon.com/dp/B08CRMWR7H/?tag=wranglerorg-20

 

[P man]

Sometimes you can buy a hardware kit from bushwacker which will have the hardware plus the seals.

 

[notnsuv]

Sometimes you can buy a hardware kit from bushwacker which will have the hardware plus the seals.

Bushwhackers are long gone (yuk) so looking at universal products.

 

[P man]

Bushwhackers are long gone (yuk) so looking at universal products.

You know factory flares don't use a seal right? I'm really not sure the oem flares would accept the seal you are looking at.

The flare would need to have a lip correct?

 

[notnsuv]

You know factory flares don't use a seal right? I'm really not sure the oem flares would accept the seal you are looking at.

The flare would need to have a lip correct?

Not OEM flares and yes there is a lip. Seal is old and needs refresh.

 

[P man]

Not OEM flares and yes there is a lip. Seal is old and needs refresh.

Look at toyota tacoma flare seals...just fyi they are also called gimps

 

[notnsuv]

Sometimes you can buy a hardware kit from bushwacker which will have the hardware plus the seals.

Right on. Gonna give this a try. Seal only it appears and genuine 3M adhesive.
Thanks.

https://www.amazon.com/gp/product/B00029J2IU/?tag=wranglerorg-20

 

[TheBoogieman]

Right on. Gonna give this a try. Seal only it appears and genuine 3M adhesive.
Thanks.

https://www.amazon.com/gp/product/B00029J2IU/?tag=wranglerorg-20

I bet they charge way more. I could use those seals you posted for my RC flares that sit slightly lower and show my paint defects.