Novak Conversions Jeep Wrangler TJ engine mounts

Vibration at 20 to 30 mph

driftnut

New Member
Original poster
Joined
Sep 11, 2024
Messages
2
Location
canton ohio
vibration at 20 to 30 mph then goes away new alignment and 4wheel done also two and half inch lift has motor mount lift of 1 inch and trans drop any ideas
 
I'd check for proper driveshaft angles and condition of U-joints. Pull rear driveshaft, drive in 4H and see if vibration is gone.
 
Novak Conversions Jeep Wrangler TJ engine mounts