Novak Conversions Jeep Wrangler TJ engine mounts

Technology that hasn't evolved

An electric pouncing or patterning tool...

View attachment 626606


My FIL recently had his barn painted. It's been in the family since the late 1700's. There was a star like emblem on the barn. Typical PA Dutch type emblem. To reproduce the emblem, I took a photo (with my phoooooonneee), and sent it to a sign maker friend. He used the photo to make a pounce pattern.
 
Most important tool ever made.

1750949177536.webp
 
Tattoo Machines. Thomas Edison made an electric pen in 1876, we've basically been using the same thing ever since. Last few years people have started moving to rotaries but not much changed for over 100 years

5861464b1500002f00e9d1eb.jpeg.webp

I want to see a video of you whippin' one of those antique, crusty, thick needle looking machines out and seeing how your customer reacts. :LOL:
 
  • Haha
Reactions: inkedrose
I want to see a video of you whippin' one of those antique, crusty, thick needle looking machines out and seeing how your customer reacts. :LOL:

When I started tattooing we still had to make our own needles and mix pigment... now I just make a purchase order. I have a machine made in the 60's that was my daily driver up until a couple years ago
 
My FIL recently had his barn painted. It's been in the family since the late 1700's. There was a star like emblem on the barn. Typical PA Dutch type emblem. To reproduce the emblem, I took a photo (with my phoooooonneee), and sent it to a sign maker friend. He used the photo to make a pounce pattern.

Where there is an interest in historical accuracy, using contemporary processes is the way to go.
 
  • Like
Reactions: BlueC and inkedrose
Gears

They've been around for thousands of years in wood form up until now in metal form.
 
The technology is the same. Metallurgy changed.

A block and tackle is still a block and tackle whether you use a chain or a rope, metal or wood blocks.

I guess we could argue over hammer technology.

Or plastic diaper pins like in the OP.
 
I think it's interesting how transportation technology has slowed to a crawl when it comes to speed.

New cars have gained safety and comfort, yet I can still only drive my multi hundred mile trips to see relatives at roughly the same speeds as when I made them back in the late 80s/early 90s.

Speed limits have gone up, but the tech to hit those speeds was easily available 50 years ago and even back in the carb days.

When cars and planes first came out there was a huge leap in transportation speeds and reduced travel times. Not so much since we've gone to the moon.

I was expecting much more than air conditioned leather seats and satelite radio. 200 mph car tech, not 80 mph couches.
 
Horse shoeing hasn't changed a whole lot with the exception of gas fired forges and electric blowers for coal forges but many blacksmiths still use coal forges with hand crank blowers or bellows and most still use a hammer, tongs and anvil. The basics are unchanged, you heat it up and beat it into shape.

VW farrier.jpg
 
Last edited:
Novak Conversions Jeep Wrangler TJ engine mounts