Black Friday Sales 2025

[GATORB8]

Where is KC stuff usually made?

IIRC at least some of their stuff was assembled in AZ, I'm pretty sure the LEDs themselves are from overseas.

 

[GATORB8]

Starting to forget whether stuff has already been posted, in case it hasn't. ARB:

 

[Apparition]

https://www.gluetread.com/

 

[GATORB8]

View attachment 657318


https://www.gluetread.com/

Thanks, been meaning to grab a kit.

FYI, signing up for email gets an extra 5% on top of the sale. The code they send you is "Welcome-5" so you guys don't have to.

 

[FarFire70]

I mean, the Northridge deal is like 40% off isn't it? What more could you want lol

It's a good price - but that seems to be their going price. It's like when HF used to state every price was a % off - even if it was their everyday price.

Plus - you just can't argue with trying to get a true BF deal

The best Zeon deal I've seen is NR for the Steel 10 + Spydura + Hawse under $1k.

@FarFire70 I'd call the NR boys and see if they can do that combo in an 8 for cheaper. Marcell at ext 5961 has always treated me awesome.

I don't know if name dropping would help.... Tim Lund & I have known each other since my Zuk days.... I also know Maxx. He's a Magnum V-8 buddy...

Thanks all! I'll give they a try tomorrow to see what kinda deal I can swing. Can't hurt to try a namedrop!

 

[FarFire70]

Harbor Freight Black Friday Sale



As usual, it isn't amazing - but here's a few killer deals I took advantage of on ITC and would recommend:





These wrenches are a steal in MM or SAE. Up to 1-1/4" in SAE and 32mm in MM. Plus V-Groove. And lifetime warranty.

I replaced (and upgraded) all my typical (more rounded/square) wrenches with these.

 

[Oneslowtj]

Harbor Freight Black Friday Sale

View attachment 657379

As usual, it isn't amazing - but here's a few killer deals I took advantage of on ITC and would recommend:

View attachment 657380

View attachment 657381

These wrenches are a steal in MM or SAE. Up to 1-1/4" in SAE and 32mm in MM. Plus V-Groove. And lifetime warranty.

I replaced (and upgraded) all my typical (more rounded/square) wrenches with these.

The disposal gloves aren’t a bad deal. 40% off. Typically stock up every sale on the 7mils

 

[FarFire70]

The disposal gloves aren’t a bad deal. 40% off. Typically stock up every sale on the 7mils

I personally find the 7mil too thick but I rock the 5mil all the time in the winter - they act almost like a 'wet suit' for the hands by keeping in the warmth. Even better when matched with gloves - when you don't need the dexterity without the gloves.

Plus I use them all the time for anything really grease (zerks, bearings, etc) or just a job I know will be dirtier than I want to spend time cleaning hands (and especially nails).

While I have at least 2 boxes in reserve - I think you triggered me to grab another box or two when I'm around HF this weekend... I have a HF addiction...

 

[John Cooper]

The disposal gloves aren’t a bad deal. 40% off. Typically stock up every sale on the 7mils

I personally find the 7mil too thick but I rock the 5mil all the time in the winter - they act almost like a 'wet suit' for the hands by keeping in the warmth. Even better when matched with gloves - when you don't need the dexterity without the gloves.

Plus I use them all the time for anything really grease (zerks, bearings, etc) or just a job I know will be dirtier than I want to spend time cleaning hands (and especially nails).

While I have at least 2 boxes in reserve - I think you triggered me to grab another box or two when I'm around HF this weekend... I have a HF addiction...

I use the 9 mil. Most time I can get 2-3 jobs per pair.

I finish a job i wash my hands with the gloves on, then take them off, put them aside for the next job.

 

[FarFire70]

I use the 9 mil. Most time I can get 2-3 jobs per pair.

I finish a job i wash my hands with the gloves on, then take them off, put them aside for the next job.

I use the 5 mil as toss-away

But I have about a dozen or more of the HF Hardy gloves that are my 'use & abuse' gloves and get tossed when any finger wears thru

And re-supply the fabric gloves any time they are in same

 

[Apparition]

 

[GATORB8]

Rockjock

 

[Apparition]

View attachment 657401

That was quick, I ordered prior to posting this here and I already have my tracking number.

 

[GATORB8]

Fusion

 

[Chris]

Black Magic Brakes Black Friday sale for forum members.

Use the codes:

BFSALE2025 which gets you 10% off your order
BFFREESHIP which gets them free shipping (this is a big deal on shipping for the big brake kits in particular)

Codes are active now and will work until midnight on December 5th.

Click here to shop!

Standard disclaimers, not to be combined, only use one code.

 

[bbaldwin237]

Black Magic Brakes Black Friday sale for forum members.

Use the codes:

BFSALE2025 which gets you 10% off your order
BFFREESHIP which gets them free shipping (this is a big deal on shipping for the big brake kits in particular)

Codes are active now and will work until midnight on December 5th.

Click here to shop!

Standard disclaimers, not to be combined, only use one code.

I almost ordered my BBK yesterday figuring that he wouldn't do a sale (his prices are already competitive). Glad I waited! Thanks @mrblaine !

Edit: Order placed

 

[Wildman]

View attachment 657401

Just to add to your post... https://www.swagoffroad.com/

 

[Wildman]

That was quick, I ordered prior to posting this here and I already have my tracking number.

They've always been quick about supplying tracking information from my experience.

 

[Wildman]

Not Jeep related but we all need outdoor gear too.

Link linked

 

[suicideking]

Tuffy is doing 20%