BDS Track Bar Relocation Bracket hokes Compatible with JKS angled bracket

[griswld]

Hello i currently have the BDS straight bracket mounted, but need to move to the angled JKs bracket and was curious if the two drilled holes on the BDS line up with the JKS or if i will need to drill different holes?


Thanks in advance!

 

[Unique Username]

You are removing the BDS bracket and installing the JKS bracket. Assuming you have an adjustable Track bar, you should only need to rotate the track bar end so the holes align with the bracket. The holes you already drilled out should be similar in location, but you might need to work them a little with a drill bit. The brackets likely have a little variation in them. I had to clearance mine a little when I swapped to the angled bracket.

Side note: For me the Clayton was a little cheaper with freight and provides the same service. In case you are still shopping.

 

[griswld]

Thanks Unique! That’s exactly what I was looking for.

 

[griswld]

Quick update: The JKS angled relocation bracket matched up perfectly with the old BDS straight relocation bracket holes.