transmission

I'm currently having a problem with my transmission shuddering when entering overdrive, and it sometimes goes into limp mode when overdrive is off. It shifts great between 1st and 2nd gear but always shudders as it's going into overdrive. Could this be multiple problems or just one?

I've replaced my shift shaft seal 3x's now and fluid is still leaking. I was able to use a ball joint press to seat the seal properly, the third time replacing the seal I coated it with RTV and let it dry for 24hrs before refilling the trans. Each time I replaced the seal I did it without...

Hi! I have a 2005 wrangler, and was driving about 30 mph when a huge cloud of white smoke came (like enough smoke the fire truck stopped to help), and when I looked under the jeep there was a huge puddle of trans fluid and it looked like fluid was coating the whole undercarriage. I’ve had a...

I have a 2004 LJ with a 42LRE at 106k miles. I threw a p0760 code for shift solenoid C about 30 miles ago. As soon as I got home I scanned the code and scheduled an appointment at a transmission shop. At the time I had no issues with shifting or any other issues. After getting the Jeep back from...

I have a 2003 Jeep TJ 4.0L V6 5-speed manual. Roughly 70k miles, heavily off-roaded. Modifications: 4.5" long arm Rough Country lift 33" tires SYE on rear driveshaft Tom Woods custom front driveshaft (currently removed) Stock Dana 30 Front / Dana 35 Rear with 4.10 gears, and an Aussie/lunchbox...

While changing trans gasket found this in my transmission pan. No issues, all gears work. 98 2.5 Auto

Hi, hoping someone can help me with this. Transmission has been having a rough time shifting. Checked the fluid and it was low. Filled it to the middle. Fluid looked good. Started shifting smoothly. Changed the engine oil today and drove to work. On the way to work it had a hard time getting to...

Hey all just looking for some suggestions or clues on a noise my jeep is making. Last year I was having transmission issues throwing codes, getting put into limp mode, etc. Local transmission shop quoted me $2800 for a rebuild so i ended up swapping in a used lower mile transmission from a same...

02 4.0 auto with 181k miles Today when getting some suspension parts upgraded the jeep was on a lift and there was a high pitched whirring/squealing sound coming from the trans pan. We put a listening device up to it and it’s definitely in the trans pan. Techs had no idea what it could be...

I couldn't find anyone specifically talking about this, although I've read many threads on the forum and they've been hugely useful - so thanks to everyone here. I changed the transmission fluid in my TJ today ('03 with manual NV3550). I used the Redline MTL 75W80 as suggested here. Using a...

I'm stumped and need some help. I have a 2000 Tj base model. Originally had the auto trans. I swapped it our for a manual 5 spd. Grounded out the NSS. (Cut the wires and connected them) and the jeep started. I drove it around the block and parked it for about a week and then went to move it and...

Bear with me, I am a do-it-myself kind of person, but I am NOT a mechanic so I am continually learning. Original owner of a '97 Sport, 4.0 L - 5 speed AX15 transmission 279K miles Just dropped the skid plate (transmission cross member) so I could change out the clutch. Working on getting it put...

Hi all, I'm not sure where to post - my '97 4.0 auto has the 32rh transmission, I think. I'm trying to see if there are any reliable websites to purchase a core, a core outer shell, or whole trans to replace my slightly cracked one. Front driveshaft ujoint blew up next to the thread where the...

After 170k miles, and some hard wheeling, my transmission has all the problems, and needs to be replaced. I'm removing and replacing the transmission myself, so it's a bench job for a local shop. I have a '05 TJ, stock drive train, SYE, and a 4" lift on 35" tires. I did a bunch of research and...

1999 wrangler 2.5 30RH trans. I drove it a hour away and it did fine then all of a sudden it felt like it stumbled a time or two and quit pulling. You can turn it off and back on and it’ll pull and grind for a few seconds then nothing. No gear or 4WD combo will pull so I’m assuming it’s in the...

Hey, guys, my input shaft isn't going into the pilot bearing on my '98. 4.0, 5-speed, clutch is lined up it's just that the input shaft will not line up to the bearing. I used the clutch alignment tool, splines are on the transmission shaft. Pictured below is how much I have left to go before...

So I’m not exactly sure if it was high gear or low gear it was either the number (1) or number (2) below drive on my auto shift console. I am unsure because the face plate hasn’t been there for a number of years. Anyways, I haven’t driven it in a while and one day it felt like it popped out of...

Howdy folks, I decided to service my trans yesterday. Not because I was having issues, but because I haven't done it in the years I've owned the jeep and I felt like it was a good idea. The fluid smelled good and had a nice red color to it. Not burnt or stinky like I've smelled in bad...

Hello Everyone. My son and I have been working on our ‘97, 4.0L Manual with 200k for a few years and this site has been a life saver for two Jeep Noobs. So first thanks to the forum and help on so many issues We’ve had some clutch problems and decided to replace the clutch. The transmission...

Hey everyone. New here sorry if this question isn’t in the right place. Yesterday I replaced the radiator on my 04 sport and the hose clamp at the bottom failed causing about 3 quarts of trans fluid to spill all over the road and I lost the ability to go into gear. Pushed it off the road and the...