steering

97 4cyl manual all stock except some late 90s bumper and wheels. Had the Jeep since the fall, brought it into a mechanic who said overall it's fine and didn't notice anything that needed immediate replacement. Previous owner was an older guy who took pretty good care of it but didnt have service...

My brother and I purchased the jeep back in early 2020, the owner before us did some modifications but many have stopped working and/or caused other systems to falter. We've been hearing a loud ticking noise in the front axle , we replaced the drivers side u joint (which was broken) but the...

Hi all! Bought a TJ a couple of weeks ago, and I was hoping someone might be able to give me a pointer on where to start with this odd steering behavior. I'm finding that when taking my foot off the gas, that the jeep wants to make a sudden dive to the right. The higher in the rpm range, the...

The steering box on my 2000 has started leaking; rather than throw a band-aid on it with stop-leak, I'm going to buy a remanufactured one off eBay. I've watched a bunch of videos, all of which show using a pitman arm puller to remove the pitman arm. Looking at eBay, there are many listings...

Maybe this applies to more JKs than TJs, but for crossover steering setups, what measurements matter in regards to the location where the drag link mounts to the knuckle? I know the distance between the mounting point and the steering inclination axis will affect the steering rate, but what...

Just a quick question as the title says. What is the maximum angle a stock TJ's (or your own TJ's) front wheels will turn? I'm guessing around 40 degrees but can't verify that myself.

Does anyone else have a really loose steering column, like to the point that its difficult to drive on the highway because the wheels go all over the road and you cant feel it in the steering wheel. Like its so bad that i cant shake the steering wheel pretty violently and the car wont turn at...

Got this cool little piece from a friend a few weeks ago and decided to install it today. GR offers them in blue and red anodizing. I'm glad the one I got was blue. Considering my previous experience with anodized aluminum, it didn't take much time, even when not in UV light for red items to...

Hi i just bought my Wrangler TJ 4.0 from 2006 and now i recognized that my Steeringwheel and the attached Upper steering shaft moves in and out. It is Not really loose - it doesn‘t wiggle around. It just slides in and out. the Upper steering shaft slides Here (See picture). I attach a Video so...

I have a developed a bit of a death wobble and need to do some of my steering components. I need to do my rod ends on the tie rod and on pitman arm as well as possibly my track bar. The rod ends aren’t available OEM right now and I’m not quite ready to do a full steering overhaul like a ZJ swap...

Is this enough clearance for belt/oil pan?? I replaced an aftermarket steering damper with Rancho 5407. The bolt length is substantially longer than the non-tapered bolt that was in it before. I feel like a lost over an inch of clearance (I can’t quite get 4 finger widths between). This is even...

Hey y'all, so to clarify my title, I don't mean I'm crawling stumps or rocks! Lol j/j! 😄 Anyhow, I've posted before about "strange issues" with my front end and specifically thinking it was the locker, and I thought all was resolved over the last year. I upgrade the tie rod, tie ride ends, drag...

Just looking for some opinions because I feel like I'm running out of options. I have a 2002 Jeep TJ X with a old man emu 2.5 lift. JKS front and rear adjustable track bars. Installed Rock Jock Curry Currectlync Steering and started having steering issues. Everything replaced thus far is...

Ok so I just installed a new track bar and track bar bracket in the Jeep. I have a teraflex high steer setup and a rough country drop pitman arm. I am not trying to get into a debate about having a drop pitman or not or what you think about RE track bars and there brackets or any other brands. I...

PO put a drop arm on and I’m looking to correct this. Anyone have a stock pitman arm?

Hey everyone, So about a week ago I replaced my steering box because it was leaking from the input seal. Put a RedHead Steering gear in it. It drove and steered amazing since the replacement but over the past few days I’ve noticed some whining while turning the wheel and a whining noise while...

I've been running a Currie Currectlync on my LJR for a couple years now on 37's and its been great, but I've recently got a G2 Core 44 front and Currie 60 rear and stepped up to 40's. My Problem is I bought a PSC kit and ran it last year but I've been unable to use the ram which is something I...

Rubicon Express track bar, used but in good condition. Hiem joint and axle bushing in good shape. Comes with mounting hardware. No dents or kinks just some scratches I in the black paint I put over the factory gray. $60 pick up or I can ship at buyers expense.

AutoZone remanufactured steering gear part number 7525. Should fit TJ’s 98 to 02 among other models. Never installed just been sitting in the garage for a year now. Local pick up or I can ship at buyers expense. It will fit in a flat rate box so probably about $20 or so

Is this pitman arm angle correct? My thought is that it should be parallel with the body of the Jeep but I have no idea really. I’m trying to track down the cause of my steering stabilizer rubbing against my track bar. Not sure if this is related at all. Please let me know of any issues you...