lift

Hey guys, I recently bought a 97 tj for a pretty good price. I noticed that it felt sluggish when accelerating , I asked the dude I bought it from and he said he just threw on the lift (4")and tires(35") and didn't mess with the gears (3.55). (Dana 44 rear, and Dana 30 front) Most of the...

Hey all. I’m brand new to the Wrangler community and just got my hands on a 2003 TJ with the 2.4L I4. Well taken care of and has just over 60,000 miles on it. It’s an auto, bone stock. I originally had the intent of doing a 4 inch lift, 33s, doing the SYE and driveshaft, adjustable track...

Im searching for a 2.5" suspension kit, I have seen the 4 shocks and 4 springs from Rough Country but I need opinions. Usually drive my TJ on unpaved roads and offroading, is there another brand you recommend for a softer ride? Also mid budget.

Okay y'all i'm tired of a stock jeep its time to lift her. I'm thinking a 3.5 inch suspension lift with a 1 inch body but i might just do the suspension. I want to be as tall as possible without needing a long arm or messing up my jeep i think 3.5 would be the best. got any advice on complete...

So I’m looking to lift my 2000 Sahara only looking for 2.5-3 of lift for my 32s. The most wheeling this Jeep will see is some light mountain trails that’s it. Mostly looking for a descent ride without breaking the bank too much. I was going to go with the Quadratec lift but after some research...

Selling new 3” Zone lift with Bilstein 5100 3” lift shocks and RC adjustable front track bar. Fits 97-06. Located near Pittsburgh, PA I bought the lift, sold the included shocks and bought the 5100s because IMO they are impossible to beat for the money. I paid a little over 1000, Asking 600...

Hey y'all im in the market for a 3.5 inch suspension lift and I want to hear your view's and thoughts of different brands of lifts!

I'm looking at getting the Zone 4.25" Combo lift for more clearance for my 33s, and the kit comes with a motor mount lift to avoid a transfer case drop. My question is, will I have problems/vibrations with the stock driveshaft while I save for an SYE and new driveshaft? Or should get everything...

Currently I have a 2” OME lift, and if I wanted to get 3” springs, the shocks would over extend, right? I also have a 1.25” body lift so I don’t want to go any higher with that. If I can’t use the OME shocks with taller springs, what’s a good combo of springs and shocks for a 3 or 3.5” lift?

Selling a new and complete 4" Currie Suspension Lift with antirock for a TJ (97-06) still in the box. Will only sell it as a full kit. Bought it for $2600 new but decided to go a different route. Still have receipt. Selling for $2250. My loss is your gain. I will take off $100 if picked up...

I have a 2006 Rubicon with the 4-speed automatic transmission and Dana 44s in the front and rear (I believe it's the 4.10 gearing). I want to lift it 4" and put 33" tires on it (probably 33x10.5—I like the pizza cutter look). My goal is to have a very capable rig to take on a trip from Florida...

Hello everyone! I'm at a dead end with my TJ. First off, I'll list my set up: 2003 Rubicon Tomb Raider 6" Rough Country Long Arm Lift Rough Country HD Steering Upgrade 33" Faulken ATW3 Tires So after doing a 1" Transfer Case drop replacing both driveshafts (SYE)/U joints, new axle bearings...

Hey all, just joined after buying a 98 Sahara. My first TJ was an 03 X that stayed stock. So I got a decent deal on a clean 112k mile 98 with Dana 44 and rebuilt Dana 30 in front. It is sitting on 33x12.50s now, but that was achieved with 2" coil spacers and a 3" BL. Has JKS disconnects already. I...

Hey everybody, hope your all doing well and being safe. I've finally gotten around to lifting the jeep. I've decided to go with 2.5 inches but am wondering what else i should replace, the jeep is kinda twitchy and a little scary to drive on the highway, its hard to describe, its not all over the...

For sale is a 1” body lift for a Jeep Wrangler TJ. Possible that it may fit YJ CJ, etc. The kit is from M.O.R.E. in Colorado. Kit is in great shape. Has all 11 aluminum pucks, hardware and both polyurethane isolators that mount under the grill. Only selling this because I went to a 1.25”...

Im measuring my suspension lift height to determine if i can remove my tc drop by adding a 1"mml and remove the current 2" body lift replacing it with a 1" body lift. After measuring the front and rear coil springs the lengths came out to 15" in the front and 11.25" in the rear. Does that sound...

Looking for a measurements thread so we can all compare clearances and discuss mods to get better clearance. Year TJ or LJ Wheelbase Front Axle Type Rear Axle Type Lift Height and Type (Short Arm/Mid/Long Arm) Tummy Tuck/Aftermarket/Stock Belly Pan Type Tire Size Rocker Panel/Rockslider...

This is probably a stupid question but I figured I might as well ask. I have a 2” OME lift on my Jeep right now, as well as a 1.25” BL. I like how the shocks ride, but I wanted some more height so I’m planning to buy the Zone 4.25 combo lift. Could I keep the OME shocks?

Hello everyone. First off if this is the wrong area to post I apologize. Anyways ! So back in May of last year I convinced my parents neighbors to sell me their 04 TJ. They are an old couple and had this thing sitting in their garage and had driven it every now and then for the last 4 years...

Greetings: I’m new to this forum and new to Jeeps. Recently picked up a 2005 TJ manual transmission with the 4.0L. Replaced the front and rear bumpers and put 31” KO2s on stock rims. Planning on a winch in the near future and wanting to put a small lift since the shocks need replacing. Not...