WNC05willys
TJ Enthusiast
Fixed my hardtop air leak, went to the local camper shell store and bought a roll of 1.5" foam tape. $8!!!!! Took my time, had to trim along the header just a bit, but worked like a charm. No more whistle above 25 mph
What did you do to your TJ today?
- Thread starter LJRubiconGuy
- Start date
WNC05willys
TJ Enthusiast
Installed the passenger side Rubicon rocker guard today. Had to quit after one because it was hotter than a whore on dollar day! Drivers side on Saturday’ cause tomorrow is Mountain Bike Ridin’ day.
Well that thing was rusty at the break.
It should handle better now. With the wind gusting, i wasn't feeling stable on curves or on straight lines for that matter.
It should handle better now. With the wind gusting, i wasn't feeling stable on curves or on straight lines for that matter.
Not mine but helped @aslin006 install hood louver, always liked how these look especially on a white TJ.
Mrhedley
New Member
Working on my half cab. Had the thought today that I might not fill the hatch and put in a scrambler window. I am going to try it for a while with the original hatch.... defrost, wiper, washer, shoving a board under it from the top of the tonneau....
We were in Townsend at the little river campground! Not our favorite, but it was nice and did the trick. Elkmont is our favorite spot!
Thanks for letting me know! I love it, just need to put some love into it. Like everything else in my Tj from my PO. I’ve spent a lot of time correcting sloppy work and neglect. I’m at a stand still right now financially, can only afford small mods, maintenance and DIY stuff
Thanks. Install was straight forward. A fine toothed jigsaw blade worked much better than a pneumatic cutoff wheel and cut it clean and easy.
Bought a new TJ today. Need some work, looks like a previous accident might have messed up her fenders. Once I get those resolved need to look at the gearing and decide how big a tire I want to run. 
Since I rebuilt my rear bumper and moved my spare to the tailgate, I decided to move the CB antenna to the front for a little better performance. I used a
FireStik MK-J4R Hood Channel Stainless Steel CB Antenna Mount
I currently have a Uniden 520XL mounted on the dash, but have a Cobra 75 (all in the mike) that I took out of a previously owned vehicle. Not sure which one I want to have in the TJ.
Matt888
TJ Enthusiast
Taught my 16 year old son how to detail his Jeep right. 
Put some Procomp 2inch coils and Rancho shocks on. 1st time tackling this. Took for ever just to do the front, but managed not to break anything.
Skipped my mountain bike ride because it was hotter than a whore on dollar day here, 90 degrees. I know many of you have much higher temps but here it rarely gets above 70. So I put the rocker guard on the drivers side. Me likey!
Rubicon guards I bought off of CL. Sanded, painted with Krylon Satin black and put ‘em on.
It's not what I did to my TJ but what I did for my TJ,
I ordered the Crown heavy duty steering upgrade kit.
I ordered the Crown heavy duty steering upgrade kit.
TrishTJ
Member
My driver's side door jamb switch was broken, and a lot of the replacement switches had bad reviews (for breakage), so I decided to replace it with this mod. When it comes to disabling the interior lights when you remove the doors, a lot of folks seem to think the mod is a $10 fix for a $0 problem, but I just wanted a reliable switch. Being able to disable the lights is a bonus. Bottom line for me: works great, looks great. Also, it was my first-ever wiring project and I nailed it.
(Note: I didn't use 3D printed nuts. I just picked up a M10x1 nut from the hardware store and sprayed it black.)
(Note: I didn't use 3D printed nuts. I just picked up a M10x1 nut from the hardware store and sprayed it black.)
Similar threads
