Novak Conversions Jeep Wrangler TJ engine mounts

What did you do to your TJ today?

Smart to do, you are better off to leave glove box and center console unlocked, they will just break it to get in.

Exactly - all somebody has to do is give it a good tug. It might would keep an honest person out but otherwise not much good

I just didn’t want a random lock cylinder or an extra key-
 
Is that a standard plastic hole plug put in after the lock cylinder is removed?

Yes sir we have a chain store down here that sells building materials that has a really good hardware selection along with a lot of little things like that and it’s probably about a 5/8” diameter I had to smooth the inside of the latch mechanism a little bit-
I just took it inside and found one that was close.
 
Yes sir we have a chain store down here that sells building materials that has a really good hardware selection along with a lot of little things like that and it’s probably about a 5/8” diameter I had to smooth the inside of the latch mechanism a little bit-
I just took it inside and found one that was close.

I did similar, bought a rubber plug of the right dimensions from Home Depot.
 
My go to to remove a back up light switch - 02 socket -

33E03595-1243-4F36-9115-D70D187C910C.jpeg
 
I resumed my chase down of why the blower only runs on high. Who cares when you're topless, but winter is coming. Replaced the resistor and the switch and no change. Next is to test if blower draw is too high and is burning out resistor. On the bright side, the wiper, washer and defrost are working again. Previous owner had wired in a trailer light harness and none of the things were working.
 
I resumed my chase down of why the blower only runs on high. Who cares when you're topless, but winter is coming. Replaced the resistor and the switch and no change. Next is to test if blower draw is too high and is burning out resistor. On the bright side, the wiper, washer and defrost are working again. Previous owner had wired in a trailer light harness and none of the things were working.

Oh also I replaced my sway bar discos on my XJ (sorry) with warranty parts from Rubicon express. I called and sent pics of bad ones and had new ones at my door 4 days later. No shipping or anything. Awsome.
 
Been buying a few things along to make the Rubi mine, @AndyG got all the hard stuff finished before I stole it from him!!! :ROFLMAO: :cool:🤫

I will get pictures posted as I get a chance (what that means is I haven't taken them yet)

Roll bar grab handles installed
Got a knock off rugged ridge dash tray cellphone holder.
Just got new door limiting straps.
 
Novak Conversions Jeep Wrangler TJ engine mounts