Recent content by someguysjeep

not fond of the tip option popping up automatically when you pick up an order. servers and drivers may deserve tips.......... but shop workers shouldn't be beggars. i make machines that cost thousands of dollars, that my shop pays me to make...am i then entitled to a 20% tip from the customer...

i got 1/4"-1/2" air tubing in red and yellow [maybe some black and/or green] if u need. semi-transparent so u can see condensation or contaminant build up if any. we plumb tons pf pneumatic equip at work and there's always lots of scraps for free. i got quite a few fittings too.

i got this fancy new 1 now ..............came all the way from southern Cali. i don't think i'll have any issues, but i do have a new Warn roller lead and a cheap hawse in the spare parts box now.

i'd agree, the line is super slick and a reason it's efficient. but at that accute angle you don't think it might/could be a participant?

the cheap F'rs do/can..........because of the shitty finish. previous conversations made me change out my amazon cheapo Chinese crap because of this very thing and it not having a perfectly smooth transition into the drum. the test just surprizes me because it's a plethora of don't do's...

ya, it does appear that it could have a transition from the flat interior to the radiused edge. the fact it goes flat at all doesn't seem correct. i might think friction could introduce a heat stress [even though the polymer line is very slick] because of being combined with the acute radius...

my lines contacted the front driveshaft after my changes and had to be reworked. i disco'd the old and with minimal easing of the bends i was able to remove it from behind the precats. and might think i could have copied those bends and put a new 1 right back in there. but i changed my route a...

for some dumb reason i'm thinkin there are 2 of these relays that seems to be listed as useful but only 1 seems to work right. i cannot remember the no. of the other, sorry. i'm sure someone will chime in.

u sure it's a rough spot??? this is not friction vs soft meltable material?

well i got in to see that neurosurgeon. she claims there is to much damage to try and guess where the exact problem might be and i'm gonna have to have another exam. she's gonna send me to a specialist that'll basically fire my nerves and try to find the short. problem is that unless it occurs...

slow go due to my current condition but i'm trying to clear the garage enough to attempt to get the room to start working on things again. the garage roof took some damage during some harsh winter wind storms, that needs fixed 1st. have to see the neurosurgeon on the 7th...it's comin up quick...

1 of these for sale close to me...way ugly. TJ Golden eagle for sale on FB in ohio...................... didnt really look at it .

flat black.............cheap and easy to recoat. i only painted the steel pieces, i don't paint hardware or aluminum.

hopefully it won't appear like she ran into a sheep that morning on her way to work.

not really an LOL guy but this might warrant 1.