Recent content by oogah

Thank you, I checked after your response and I guess I was looking at the colors wrong in the fsm, much appreciated

Got a better look at the connector wires and one is purple and yellow, the other is purple and blue

Honestly can't remember and I most likely did, and the fsm says the the wires for that sensor are light green/ violet and white

It has a solid purple and a purple with yellow line

Replaced them with some led pods, looked and the fsm, it says its the ambient air sensor for temp/compass. Think that's for the display on the rear view mirror but I don't have it on mine so I'm trying to see if it ever was connected to anything

This connector is between the washer fluid pump and headlight connectors, all I see in the fsm is a ambient air sensor but the one I have is plugged in and I never unplugged it, any help is appreciated

Never pulled throttle but the one thing I can think of is the harnnes on the back of the valve cover

Also new crown opda, I never took the head off and I haven't been able to actually run it to tell but it gets oil pressure and starts right up, can't seem to find any vacuum leaks, loose wires, or grounds, everything worked before so I'm pretty sure I'm missing something on my end and not the...

I'm honestly scared to start it since there's a new cam in it that needs to break in

Plugged in I get about .03 resistance on both and no voltage on either

I'll check with it plugged in

Or will they show voltage only when plug led into idle control

I did yesterday and everything checked out, just probed iac prongs and no voltage on either and .03 resistance on one and 15.34 resistance on the other but no voltage on either

Just wanted to make sure it wasn't something as simple as that, I'm just running out of Ideas for what it could be

On the positive and negative leads on the battery, how many connections should I have