Recent content by CodaMan

  1. CodaMan

    Spicer u-joint number

    They are probably the most common u-joint.
  2. CodaMan

    GMC Pickup Shocks?

    I run the Rancho 7000's on my 3/4 ton F-250 and they are great.
  3. CodaMan

    Shock height and lift size

    I have a 2.5" srping lift and originally went with the 2-3" Rancho shocks, they were too long and I had hardly any down travel. I used the Rancho 30 day satisfaction guarantee and replaced the with the 0-2" shocks and down my down/up travel is almost perfect at 50/50.
  4. CodaMan

    Misfire Help

    I would swap 2 injectors and see if the fault moves, then you will have a starting point for troubleshooting.
  5. CodaMan

    Rear bumper tire carrier manufacturer

    Looks like a Smittybilt
  6. CodaMan

    Arkansas Jeep Fest in Arkansas

    I might make it. What part of Arkansas are you from?
  7. CodaMan

    Replacing fuel skid without dropping tank entirely

    Are you guys working those clips properly? You don't remove them, press the tab and pull the line out. When ready to reinstall the line just push it back in.
  8. CodaMan

    Body lift & MML vibes?

    How about the MML will give you slightly better driveline angles on a small lift and the BL will give you more tire clearance, plus it makes everythinbg fit better after the MML.
  9. CodaMan

    Inside Rotopax mount?

    I would think it'd be pretty easy to make a roll bar mount :unsure:
  10. CodaMan

    285/70R17s With No Lift?

    That's what I run with my 285/70R17 JL take-offs.
  11. CodaMan

    Gas smell when turning off Jeep

    Any EVAP codes?
  12. CodaMan

    Lets see your TJ with 17" OEM wheels

    You need to address the difference in the hole size for the lug nuts. The JK and JL wheels mount to a larger stud so the standard TJ lug nuts don't have enough surface area to mount them safely. See my write-up below on the issue and how to overcome it...