T
TexasTJ2004
I love my TJ 45 From Houston Area
Latest activity Postings Attachments Images About
-
-
TTexasTJ2004 reacted to JeepsR4Me19's post in the thread Rebuilding TJ Rubicon NP241OR with some parts from JK with
Like.
post pics as you go. -
TTexasTJ2004 replied to the thread Rebuilding TJ Rubicon NP241OR with some parts from JK.I believe that I already did. I am transplanting https://ebay.us/m/9ygPBd TJ speedometer housing on top of JK 241 rear plate. It is...
-
TTexasTJ2004 posted the thread Rebuilding TJ Rubicon NP241OR with some parts from JK in TJ General Discussion.Hi folks, I am rebuilding my NP241OR. The rear side of the case is damaged, so I am planning to take rear side from JK NP241, which are...
-
TTexasTJ2004 replied to the thread NP242 Transfer Case Swap?.IIf you apply a lot of torque to the front at high speed and the steering wheel is turned to the maximum left for example, doesn't it...
-
TTexasTJ2004 replied to the thread NP242 Transfer Case Swap?.Question to all the folks here: After you upgrade to NP242, now you have torque going to front wheels in all situations if selected. How...
-
TTexasTJ2004 replied to the thread What gear ratio should I install in my Jeep Wrangler TJ / LJ? (and other re-gearing FAQs).If you have LJ, then you can read transmission temperature from OBD. You dont have to use a bung and add thermal sensor into it. I had...
-
TTexasTJ2004 replied to the thread What gear ratio should I install in my Jeep Wrangler TJ / LJ? (and other re-gearing FAQs).It is always in the wrong gear because it is simply not geared right. 4.88 with 35s - it is correct gearing for 31s:)
-
TTexasTJ2004 replied to the thread What gear ratio should I install in my Jeep Wrangler TJ / LJ? (and other re-gearing FAQs).At least on flat highways of Houston metro, the below combo works fine. Other places (a lot of hills or mountain roads) I would go much...
-
TTexasTJ2004 replied to the thread What gear ratio should I install in my Jeep Wrangler TJ / LJ? (and other re-gearing FAQs).I am targeting my gearing for comfortable daily driving in 2HI. Not doing any crazy trails, so Low gear (NP231) is working well for me...
-
TTexasTJ2004 reacted to jjvw's post in the thread What gear ratio should I install in my Jeep Wrangler TJ / LJ? (and other re-gearing FAQs) with Like.
Only on 05-06 TJs. I'm stuck with the irritating factory shift points.
-
TTexasTJ2004 replied to the thread What gear ratio should I install in my Jeep Wrangler TJ / LJ? (and other re-gearing FAQs).The folks who recommend 4.88 for 33s don’t know what are they talking about. I have 4.56 (very close to 4.88), and 31 is the maximum...
-
TTexasTJ2004 replied to the thread What gear ratio should I install in my Jeep Wrangler TJ / LJ? (and other re-gearing FAQs).With 4.56 and 30 inch tires, I am at 2750 RPM at 75. I would say that it is good enough. The problem with going deeper, is that on flat...
-
TTexasTJ2004 replied to the thread What gear ratio should I install in my Jeep Wrangler TJ / LJ? (and other re-gearing FAQs).I installed the transmission cooler from derale. When used with correct gearing, and derale, 42RLE does not overheat at least for me.
-
TTexasTJ2004 replied to the thread What gear ratio should I install in my Jeep Wrangler TJ / LJ? (and other re-gearing FAQs).I would do 5.38 for 33s. 5.13 is the bare minimum for them.
-
TTexasTJ2004 replied to the thread What gear ratio should I install in my Jeep Wrangler TJ / LJ? (and other re-gearing FAQs).I recently downsized my tires to 30 inch tires (from 31 inch). Now I am running 4.0, 42RLE, 4.56 gears and 30 inch tires. It drives...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…