mrblaine
Crew Member From Quail Valley, CA
Latest activity Postings Images About
-
-
mrblaine replied to the thread Help with stuck tie rod bolt.I'm still trying to figure out why he cut off the only part that makes it easy to remove? All you have to do is take the axle end out... -
-
mrblaine replied to the thread Help with stuck tie rod bolt.All I have to say is there's a lot of folks not looking at the same pics I am. OP, You are going to have to stack up something to push...
-
mrblaine replied to the thread Has anyone modified the body mount style steps to mount to the frame?.I have no opinion on the viability of his request, just clarifying what that request is.
-
mrblaine replied to the thread Has anyone modified the body mount style steps to mount to the frame?.He is asking if the ones that get clamped by the body mounts can be converted to be frame mounted.
-
mrblaine replied to the thread PSC Hydro-Assist Installation Instructions (Using Black Magic Kit).I suspect the filter is there to prevent catastrophic failure in the event of catastrophic failure. Case in point is Gerald was hauling...
-
mrblaine replied to the thread Fire Extinguisher Rabbit Hole.Jerry won't have to if he ever needs to put out a car fire. Facts will be in evidence shortly thereafter.
-
Maybe. Make sure you get the shifters and all the parts. Look on Advance website to see parts list. https://www.advanceadapters.com/4846
-
mrblaine replied to the thread Rubicrawler for $1400.There are no indicators that you are delivering too much torque to the axles. The chassis doesn't torque over, the engine doesn't bog a...
-
mrblaine replied to the thread Axle bearing and seals.Can't be the same for both since the 35 uses a Torrington roller style and the 44 uses a cup and cone tapered roller bearing. The 35 is...
-
mrblaine replied to the thread Rubicrawler for $1400.That says the 241 is probably too low to achieve the requisite wheel speed so now I'm lost.
-
mrblaine replied to the thread Rubicrawler for $1400.Were the axles geared correctly?
-
mrblaine replied to the thread Rubicrawler for $1400.Wheeling is too vague. Dunes and rocks are at opposite ends of the spectrum and what works well for one doesn't work so well for the other.
-
mrblaine replied to the thread Rubicrawler for $1400.Manual or auto with the 231? I pointed out the ratios, if you want double 2.72-1 ratios for the money, then it makes sense to you. All...
-
mrblaine replied to the thread Rubicrawler for $1400.Doesn't to me but it isn't my Jeep. You have your own sensibilities to live by. No idea if you will want or need it. The auto makes...
-
mrblaine replied to the thread Rubicrawler for $1400.The 241 is problematic. The 231 is laterally problematic. But, in general, if you are paying new prices, winding up with 1-1, 2.72-1...
-
-
Loading…
-
Loading…
-
Loading…
