What did you do to your TJ today?

Is it in quarantine?

200.gif
 
Serious question…. What’s a ’ house dancer’?


Ruh Roh

Four new drain holes? I did only two in front of the rear control arm mounts. Where are the other two typically placed?
In this context, the "house dancer" is the regularly scheduled dancer at the venue - in this case a restaurant. This dancer appears at most/all shows, and is responsible for bringing in other/guest dancers, if any. In my case, the restaurant had Belly Dancing 1 Saturday nite a month, it was always me and 3 other dancers that I'd bring in. I know one local dancer who is house dancer for at least 2 restaurants that I know of - she might even be at 3. She does weekly shows at each, on different nites. I've even heard tell of dancers who did shows at 2 restaurants on the same nite - but that gets brutal fast!

As for drain holes, remove the rear bumper, and drill a pair of holes in the very back end of the rear crossmember where it wraps itself around the end of the frame. Drill them as low as you can, then slot the holes down to the bottom of the wrap-around to get everything to drain. You can't drill from the bottom up at this location because the rear bumper's bottom braces would cover the holes - although I guess you could drill through the whole mess.

00.jpg

See all the crud? This was before I slotted it to the bottom. That didn't turn out very pretty, but its hidden and it works.
 
  • Like
Reactions: Ephry73 and Kiwi TJ
In this context, the "house dancer" is the regularly scheduled dancer at the venue - in this case a restaurant. This dancer appears at most/all shows, and is responsible for bringing in other/guest dancers, if any. In my case, the restaurant had Belly Dancing 1 Saturday nite a month, it was always me and 3 other dancers that I'd bring in. I know one local dancer who is house dancer for at least 2 restaurants that I know of - she might even be at 3. She does weekly shows at each, on different nites. I've even heard tell of dancers who did shows at 2 restaurants on the same nite - but that gets brutal fast!

As for drain holes, remove the rear bumper, and drill a pair of holes in the very back end of the rear crossmember where it wraps itself around the end of the frame. Drill them as low as you can, then slot the holes down to the bottom of the wrap-around to get everything to drain. You can't drill from the bottom up at this location because the rear bumper's bottom braces would cover the holes - although I guess you could drill through the whole mess.

View attachment 281475
See all the crud? This was before I slotted it to the bottom. That didn't turn out very pretty, but its hidden and it works.
And here I thought a house dance would be like a lap dance on a much larger scale!!!!!! :ROFLMAO: :ROFLMAO: :ROFLMAO:
 
Man if you looked like that girl on American Pickers Danielle!!!!!! I would come watch you exotic burlesque!!!!!


:ROFLMAO: :ROFLMAO: :ROFLMAO: :ROFLMAO:

Well, I hate to say it, but "I don't look like that!" I was once in a weird combination dance workshop - 1/3rd Belly Dance, 1/3rd Twerk, and 1/3rd Burlesque. I'm an "ok" Belly Dancer, but I don't have the muscle tone for Twerking (nor do I really see what the point is, exaggerated "Baraka Butts" - an exercise we do in Belly Dance dance classes to build glute muscles), and I certainly don't have the innate sensuality to make a good Burlesque dancer. Sometime, I'd like to try pole dancing just for shits and giggles! Probably wouldn't be any good at it, but it might be fun to try once.

My wife says that I could go to a strip club, and be so busy analyzing the dances that I'd completely miss the point of the whole thing. She's not wrong...
 
I didn't do anything "to" my TJ today, but I spent over an hour on hold with 4WP checking where the other 2 boxes of my rockjock lift are. They didn't know, claimed it all shipped together. But via 1 tracking number? Nah, UPS don't do that mess. Sent photos of what I *do* have, the box showing "one of 3" written on it, and tracking sticker, and let them know I'm missing the springs and all 8 control arms. That was almost 5hrs ago and no response from them yet.

Woo.
It's a pain, but I'm guessing they will help get it sorted out!
 
  • Like
Reactions: John Cooper
Installed some “night lights” on all four corners. I’ll probably add two more pointing forward from about the middle of the frame before I wire everything up.

View attachment 281478

View attachment 281479

View attachment 281480
Are your wheels and tires scared of the dark? :)
Scared of needles?
My ink is deep lol like they just look like "spread" nothings! should have waited for modern no spread and got some from my wife's eyebrow tattooist! :)
 
Geez you should see the Hornets in west OZ they can carry a lamb or even a baby off for a feast!
I got into a nest of yellow jackets once, using a weed whacker. Damn things stung me over 100 times and I had to go to the hospital. That was not fun. Ever since then, I've been one with the Bees! ;)