42RLE transmission pans with sender bungs

[mrblaine]

If anyone is considering one, I wouldn't wait too long. I have 6 left out of the batch of 25 I had done. Had done as in stripped and powder coated. I did the batch a year ago and I didn't expect them to sell fast so that isn't a problem. What is a problem and why I probably won't do another batch is I am still not at the break even point. I won't be until we have 2.5 left. The last 2.5 are my profit on this whole mess. The single cheapest part of this project was the actual aquiring and brazing in the bung including labor and materials. (outside of the box they ship in)

I'll still do them on an as needed basis and just try not to be as offended over not delivering a finished product.

 

[Strizzo]

I wasn't aware this was a stocked item, was going to send a pan to have a bung added at some point whenever I eventually to do a trans fluid change, and could add a gauge.

This makes it easy, ordered.

 

[topfuel83]

Well I was going to wait until the spring to order one, but not now. Order placed! Thank you for the heads up, and thank you providing great products and advice to the TJ world!

 

[shortydog33]

Highly recommend this product, made installation of my transmission gauge a snap and it puts the sender in the right spot for an accurate reading. The product and the service are top notch.

 

[jjvw]

Highly recommend this product, made installation of my transmission gauge a snap and it puts the sender in the right spot for an accurate reading. The product and the service are top notch.

I bought one of Blaine's pans back when I changed to an automatic. Both because it made adding a temp sensor that much easier and because having a drain plug will be good to have in the future.

 

[SuspectLJ]

thanks for the heads up! i just put my order in, I've had this bookmarked for a few months now.

 

[taylormade73]

Thanks for the reminder, Blaine. Ordered.

 

[flyinfish]

Was going to pull the trigger earlier but since they're almost gone I better step up to the plate.
Ordered, Thank You Blaine for another well thought out quality product!

By my count, that leaves one pan left by comments alone.

 

[mrblaine]

Was going to pull the trigger earlier but since they're almost gone I better step up to the plate.
Ordered, Thank You Blaine for another well thought out quality product!

By my count, that leaves one pan left by comments alone.

No, not everyone who purchased replied. We are out and depending on how it goes, may have to do a few refunds based on FIFO.

 

[flyinfish]

Order Cancelled email received.

 

[mrblaine]

Order Cancelled email received.

Sorry about that. She didn't get the limit placed in time due to not feeling very well yesterday. I can still braze in a bung if you want to send in a pan, it just won't get powder coated and you'll have to paint it.

 

[flyinfish]

Sorry about that. She didn't get the limit placed in time due to not feeling very well yesterday. I can still braze in a bung if you want to send in a pan, it just won't get powder coated and you'll have to paint it.

I'll just braze in the bungs myself. I do appreciate the offer.

 

[SuspectLJ]

My order didn't make the cut but i definitely plan on sending a pan in the future.

 

[Lax22]

Sorry about that. She didn't get the limit placed in time due to not feeling very well yesterday. I can still braze in a bung if you want to send in a pan, it just won't get powder coated and you'll have to paint it.

Can you DM me details on how to send a pan in for the bung brazing? Thanks!

 

[mrblaine]

Can you DM me details on how to send a pan in for the bung brazing? Thanks!

Same as always, buy a pan, ship it to me with who it is for, I do the work and ship it to you.