Wobbly Passenger Seat Solution

[Space Naught]

Ill be that guy and drop the Summit link for replacement bushings.

https://www.summitracing.com/parts/sum-rp10061

 

[iconoclasthero]

Still holding up well. I don’t see why you would have any issues with the torx screws.

I generally don't use doors or a top but the outside Torx bolt was nothing that PB Blaster couldn't loosen up apparently. Looks like I'm going to need to pull the seat or get a 3/4" T40 bit for the inside.

FWIW, my notes are here.

Thanks, great idea keeping track of all that stuff. I've been toying with the idea of using github and then filing issues against it. Nice thing is that I can make the repo private.

 

[iconoclasthero]

Ill be that guy and drop the Summit link for replacement bushings.

https://www.summitracing.com/parts/sum-rp10061

Turns out that SSTJ's notes included that as well as info on replacement seat foam...

FWIW, my notes are here.

 

[Space Naught]

Turns out that SSTJ's notes included that as well as info on replacement seat foam...

Oops, didn't click on SSTJ’s notes. I already had the link up since I was debating on buying new seat foam.

 

[Tob]

Ill be that guy and drop the Summit link for replacement bushings.

https://www.summitracing.com/parts/sum-rp10061

This must be a new development. I was not aware of those. They may be a better fit than the hillman hardware, although 5 times as expensive. Thanks for posting.

 

[Space Naught]

This must be a new development. I was not aware of those. They may be a better fit than the hillman hardware, although 5 times as expensive. Thanks for posting.

These came out around the time of the seat foam replacements, but I don’t run them personally since I can just print the crappy 3d printed ones in bulk and replace as they crack. Perks of having too many hobbies I guess?