Looking for a 0.5" coil spring spacer

[SSTJ]

I'm trying to find 0.5" coil spring spacers. (Or isolators, if I can double-up on those just as well?) I can find plenty of 0.75" spacers, but no 0.5" spacers.

Anyone have any recommendations? Or should I instead look for a 1.25" set and replace the stock isolators, which I think are 0.75"? I think that would work in the front, but I'm not sure about the back, and am not near my TJ at the moment to look.

 

[HornedToad]

https://www.mcmaster.com/product/1610T48

Buy a 1/2” thick disk like this one and cut the middle out with a hole saw.

Rokman used to sell spacers of varying thickness but they have long been out of production.

 

[bobthetj03]

Old Man Emu makes 10mm spacers, which is as close as you're going to get to 1/2".

https://www.quadratec.com/brand/old...sion/coil-springs/front-isolators-and-spacers

 

[SSTJ]

https://www.mcmaster.com/product/1610T48

Buy a 1/2” thick disk like this one and cut the middle out with a hole saw.

Rokman used to sell spacers of varying thickness but they have long been out of production.

Ok thanks, I'll consider that.

 

[SSTJ]

Old Man Emu makes 10mm spacers, which is as close as you're going to get to 1/2".

https://www.quadratec.com/brand/old...sion/coil-springs/front-isolators-and-spacers

Thanks. But gosh, $70 total.

 

[LONGJP2]

I would have swore mine were 1/2", but I don't see any listed on Amazon or Ebay.

I did see a set of 5/8 on Ebay if that helps.

 

[TheBoogieman]

Close enough.

https://www.ebay.com/itm/1250214492...d=link&campid=5337789113&toolid=20001&mkevt=1