Novak Conversions Jeep Wrangler TJ engine mounts

Bestop Reflective Logo Removal

Nickgsjeep

Jeep Nerd
Original poster
Supporting Member
Ride of the Month Winner
Joined
Aug 25, 2019
Messages
1,650
Location
USA
I know several of you on here have removed the giant reflective logo from your new-ish Bestop soft tops.
1. How?
2. How well did it remove the logo?
3. Did it damage the top? Specifically the vinyl coating?

Thanks everyone
 
@rasband was able to remove his pretty well. Not sure of his process though.

Mine was this product (another forum member suggested it), VLR: https://www.amazon.com/gp/product/B01N102AHQ/?tag=wranglerorg-20

It's lots of scrubbing and scrubbing and then trying to blend it into the surrounding top color.

With the zipper issues and stuff though, my next top won't be a bestop (part of my issue is it being an LJ and them not having the nicer top available for it - I assume).
 
my cheap/easy side would rummage to see if I had some tire black/ paint. Mask off and apply To see how it looks covered -black on black?
 
Fingernail polish remover removes anything safely, except fingernail polish.
Mine was this product (another forum member suggested it), VLR: https://www.amazon.com/gp/product/B01N102AHQ/?tag=wranglerorg-20

It's lots of scrubbing and scrubbing and then trying to blend it into the surrounding top color.

With the zipper issues and stuff though, my next top won't be a bestop (part of my issue is it being an LJ and them not having the nicer top available for it - I assume).

Hmm. I’m worried about chemicals drying out and ruining the vinyl coating on regular (non twill) soft tops. I might do a patch but I feel like any sewing or adhesive will only weaken the top as well.

my cheap/easy side would rummage to see if I had some tire black/ paint. Mask off and apply To see how it looks covered -black on black?

My top is Spice, but not a horrible option
 
I only use Walmart's finest.
1696935400424.png
 
Last edited:
Novak Conversions Jeep Wrangler TJ engine mounts