skid plate

Hey everyone, I know there are several threads about the UCF Ultra High Clearance Skid Plate, but I have a couple questions specific to my setup. I’ve got a 1998 TJ with a manual transmission, 1.25” body lift, 1” motor mount lift, and a slip yoke eliminator. I’m ready to replace the stock...

Looking at picking this engine skid up cheap locally but I am not sure it will fit. Seller says its off a 2002 6 cylinder. I have a 2006 6 cylinder, but I think the frames may be different for the 1997-2002 and 2003-2006? Assuming the front of the skid mounts to the frame.

Hi there, I am getting the arb reabumper swing away tire carrier and I am looking for the same look as the pic below. Do you recognise the fuel tank skid plate brand? Will the rugged ridge one give me similar look? Might be the rugged ridge on the pic 😂...

Bear with me, I am a do-it-myself kind of person, but I am NOT a mechanic so I am continually learning. Original owner of a '97 Sport, 4.0 L - 5 speed AX15 transmission 279K miles Just dropped the skid plate (transmission cross member) so I could change out the clutch. Working on getting it put...

The TJR has been sold. Thank you to all the great members on this site, maybe one day I will be back

Howdy - I bought a 1998 TJ Sport a couple of years ago knowing it was kinda on it's last legs. The time has come. It's rusting like crazy (located in CT). The muffler fell off, and when I went to get it fixed the mechanic basically said I shouldn't be driving it around at all for fear that the...

PN 619620083883 3/16 steel Skid only $150 pick up only Lakeville, MN.

Hello guys, just like everybody with a jeep.... I'm wondering what to improve and I'm considering priorities... and since opinions and advices are always welcomed I would like to know what do you consider should be next... I already have a pretty decent rig (06 TJ rubicon) so lockers, Dana 44s...

I have a zero-mileage UCF ultra high clearance Transfer Case Skid for 97-02 TJ/LJ, I'm looking to get $350 picked up for it It's perfect condition new and unused. I only painted the inside welds with KBS chassis black in my rear that when installed the salt in NY would make the aluminum and...

Engine skid plate with hardware

Hello, I was looking for Barnes skid plates to improve the clearance on my 06 rubicon, and found that there are 3 different set ups, the 0", 2' and the 3". I understand that the 3" would be as stock as possible (maybe 0.75-1.00 of inches clearance) but I was thinking about the flat (0" inches)...

Complete Tummy Tuck by Terraflex Includes transfer case skid plate, transmission skid plate, and engine skid plate and hardware. Asking $650, located in Medford Oregon.

So I took my skid plate off a couple months ago after I bought it to diagnose my transmission leak and also clean it. Well I stripped the nutserts pretty good and It was a PITA trying to screw the bolts back in because there were barely any threads left, I am actually running 2 bolts on one side...

So after trying my hand at some rock-crawling last weekend, I am in love. However did dent up my factory skid plate. So I'm in search of a new one. Can anyone recommend a belly pan skid that works without any body lift?? Also are there any other skids I should invest in? I currently have a...

Just pulled the stock front fender flares off my TJ. PO did a lousy job putting a bedliner coating on, but it would come off with a simple power wash or light sanding (it's already flaking off). All lenses and light housings are included (I forgot to put one of them in for pictures, but have...

Free LJ Rubicon Parts Front tie rod Linkage, Roll Cage with padding and covers, rocker guards, steps, Skid plate, bumper, air cleaner box and filter Moving need to pick up this weekend

Doing a UCF skid with my engine swap and even after pushing the 5.9 as far back as possible to weld the engine mounts in I knew the trans was still about 2" further forward than the factory position. On the upside, that means I get a little more rear drive shaft length which I'll be needing due...

Stock skid plate from a 2001 TJ, good shape with one dent but doesn’t affect anything. Bolts included. Buyer pays shipping.

The trails we run have some great rocky parts and flat out rock climbing and we love going on them. I'm lifted with no tummy tuck but also am able to keep the transfer case plate bolted to the frame, so no TC plate spacers. I ordered a Skid Row tranny/oil pan skid and it actually covers part of...

Hello, I have a 2001 Wrangler TJ with serious frame corrosion. I’m not handy with major repairs so to there’s not much more I can do with it. The skid plate is holding on to the frame by only one side, meaning 3 bolts. So the transfer case is sagging a little. Of course I’m nuts driving it in...