savvy

Looking for a single Savvy lower control arm. Any chance you have one sitting around you don't need please let me know. Edit: Must be double adjustable and double Johnny Joint (did Savvy ever make anything else?)

Savvy aluminum double adjustable short arm set off my TJ. There is normal wear and tear but all the joints are tight enough I can’t move them by hand. There are nicks, scrapes and some gouging in the lower arms. I’ve had them for several years and I disassembled and cleaned/greased every year...

$350 Pulled from 1997 Jeep Wrangler TJ with 4.0L and AX-15 (5-spd manual) at 160K mi. 2.72:1 low range. Has Advanced Adapters SYE (slip yoke eliminator) kit which was installed at 150K mi. Savvy cable shifter and stock Jeep shift handle included. 23 spline input shaft, protrudes 1 9/16” ftom...

Hey everyone, i know this question has been asked before but I've recently read some negative stuff about savvy changing owners/long lead times...etc I'm looking to order a new cable shifter for my 241 and was originally gonna go with Novak but the Savvy shifter is currently $77 cheaper after...

It put my savvy flat belly on, and had to relocate my rubicon locker pumps. I saw lots of people relocating their compressor to the engine bay, usually the ABS tray. But frankly that seemed like a waste of valuable convenient real estate for something that is mostly set and forget. I have other...

Found this on Denver Marketplace. Have no idea what these retail for but looks new says never installed. Aluminum tail gate skin, $150. Not mine, don't know the seller...

I am in the process of swapping my Dana 35 for a Dana 44 and have gotten control arms and trackbar connected and bolts tightened loosely when I just noticed something on this axle that I picked up. The shock brackets seem to be clearly aftermarket and installed incorrectly. Well, maybe not...

Metal Cloak front set 7051 and 7050 $350 Savvy rear set 9103SA and 9106SA $500 JKS track bar front 18055 and rear 18268 $350 Savvy NP231 TC cable $100 At the moment i am only taking dibs, no payments. I will need about a week to take everything off the Jeep. Everything is roughly 2 years...

Hello Forum Members, I am shopping around for a Savvy / Currie 4 inch lift kit for my TJ, and am not quite sure what's the best place to get it. I know there is a thread about Savvy going out of business or changing owners, but could not quite get whether they are not shipping any products at...

Hi all! I am new here! Long time YJ owner and first time TJ owner. I have been searching for my dream one and finally found it. 2006 Red Rubicon LJ. So, first big mod is going to be a Savvy Midarm. I am not comfortable with the welding on this kit and looking for someone who might know anyone...

I have the front control arms from my Savvy Mid Arm. (Doesn't include Joints) Qty:2 Lowers 2" 7075 Aluminum. @20" Qty:1 Upper 1.5" 7075 Aluminum. @2.5" These have little use before I stretched the front and needed longer arms. Threads are in prefect condition as they were assembled with...

Looking for a set of Savvy light mounts for the front bumper https://savvyoffroad.com/product/bmp-lm/

Rear Savvy bumper for rust free half doors. Bumper is powder coated. Has a ding on the lower passenger side. Msg me if needing more specific pictures.

Taken off of my TJ to install Savvy mid arm. It's been awhile since I packaged these up, but I recall that I was missing the mounting hardware for one joint.

These are a set of eight of the double adjustable arms without wrench flats. They have grooves on the inside of the ball that leads me to believe they are drilled to work with the grease-able bolts but I can't confirm without disassembling and I don't care to do that. These arms were on my Jeep...

$250 $210 OBO shipped with Redline CV-2 Great for someone wanting to change the rear pinion angle for a small lift. Giving forum members a chance at these first. I'll leave them up till Wednesday, July 26, then post them on local FB Marketplace.

Bought mid arm kit for my LJR and would like to use genright belly up / tranny mount. I have savvy 1.25 body lift and MML. Looking for confirmation that the genright won’t get in the way of mid arm business . Or what mods / problems will need to faced to get these 2 to work together. Thanks rj

Hi All, Currently undergoing an axle swap and need to know where to mount the three link brackets on the front axle for the Savvy mid arm. Are there any measurements to go off of? Should the top link be centered on the axle vertically and some specific distance to the driver side of the axle...

Savvy Tails - in good working and physical condition. I've decided to go with the QT LED tails so that I can put my license plate back to the factory location. I really want to hook up my backup camera and the spot in the center of the tire carrier is really the only good option (so I back up to...

Does anyone know how to tighten/remove the radiator supports on the Savvy 1.25 BL? I know that you have to take the headlight out to access the top bolt, but how do you grip it? I've tried pliers, wrenches, a vice grip, using a pry bar to try to hold it in place, all in vain. Or should I just...