rust

A few weeks ago, my Jeep was unable to shift into gear. My engine was running fine, but I was unable to shift. I replaced the slave master cylinder. But I was still unable to shift with the engine on. The shop I ended up taking it to, wanted to replace the clutch. But after sometime trying to...

Hi, I noticed this bent piece on the rear end drivers side? I'm a beginner at all of this and have no idea what this is or what it should look like. Maybe this is normal? But it stood out to me... thought I ask. Thank you in advance:)

Hi sorry if this post is out of place. I’m looking for input on why my upper and lower control arms aren’t lining up to their brackets.(They are lacking roughly an inch) I’ve got the replacement trail arm mounted and have measured from trail arm to trail arm as well as to the body mount nearest...

Hello all, I recently purchased a 2006 Wrangler and have been slowly replacing parts on it. I am in the process of doing a Savvy cable shift conversion for the transfer case. The Jeep is incredibly clean considering it has spent its whole life in NH and Maine. I just dropped the transfer case...

Hi guys, I’ve been following this forum for years now but haven’t joined/made a post until now. I, like many here, am thoroughly concerned about frame rust on my tj. Until this past week I wasn’t aware of the no drain holes issue that the bright minds at chrysler have left us with. I got an...

Hi All…first timer here… I’ve got an opportunity to buy a low mileage ‘06 TJ Rubicon with only 25,000 miles for $19K. It’s a single owner and this one has been in New York its entire life. Everything looks pristine (from 20 ft away) and I’ve asked the dealer to send me some closeup...

I have a 2004 TJ that has been very neglected for years, I’m finally in a financial state where I can entertain getting it fixed up but I’m concerned that it’s too far gone. Specifically the drivers side floor pan is completely rotted out, to the point where it can barely hold weight. The...

I’m overwhelmed and out of my depth. My brother bought me this Jeep to help me get RHD for my new job as a rural mail carrier sub. My route covers 110 miles of highway, in town, and rough rural roads. I am currently underemployed (broke) but I can get more work subbing for other routes (or get...

Hi! I have been reading this forum religiously since the past month to learn about maintaining and loving a TJ. I’ve been in the market for a TJ for some time and came across an ‘06 Sport with decent mileage, automatic, 4L I6, mostly been in WV and about 6 years in Ohio. What do you all think of...

Hey guys, so I wanted to upgrade my suspension (was thinking of the H&R + Rancho combo) but as I took a closer look I've now realized that that my rear upper coil spring mounts on both sides are pretty rusted. When I boutht the jeep a few years ago, the first thing I looked for was rust (thanks...

Wanting to purchase this Jeep. 5 speed w 125k miles for $9k. 4 inch lift, aftermarket wheels and tires, upgraded headlights, new bucket style sport seats. Previous owner had it for 2 months but other PO had rebuilt the frame? Also, rust spots on the door and driveshaft/differential (pictures...

I just purchased my first TJ and it’s frame Is in GREAT shape. No rust anywhere. It’s a great project car. I drove to AR to pick her up. She has a rebuilt motor and seems to have been kept up for the most part. I bought her from an elderly gentleman who says he’s basically just started her...

Hi guys!! I’m thinking about getting a 2.8 sport 2014, overall It looks really good but I’m not sure if this is too much rust?? 🤔 The only visible rust I could find!

Hi Guys pretty new in Jeeps, but decided to join the "army" :) Found this 1999 model TJ on Dana44 pretty nice inside outside and took few pics under...would appreciate if someone give me some nice and honest opinion how bad or good or ok is this one or should I just walk away? Owner says no rust...

Howdy - I bought a 1998 TJ Sport a couple of years ago knowing it was kinda on it's last legs. The time has come. It's rusting like crazy (located in CT). The muffler fell off, and when I went to get it fixed the mechanic basically said I shouldn't be driving it around at all for fear that the...

Just had some Frame Caps added to both front and rear trail arm mounts, and center skid plate. The question is do I add drain holes to the recommended spots right under all 4 trail arm mounts? There aren't any real places for water to escape the frame since the frame caps don't have side holes...

I have an unused 1997-2002 center repair section from Pocono Metal. Label and online order info doesn't specify left or right. Guessing from the photos, it is the right center frame piece. They sent me (or I mis-ordered) the wrong part. $130 new. Make an offer. Can help with delivery any...

Hi all! Though this is my first post, I’ve come to this site countless times over the years for advice and how to’s; it’s been an invaluable resource to me. I figured what better place to seek pragmatic advice over the fate of my beloved TJ. Currently, I’m at a tipping point with it. It...

Hey guys! So I recently removed some old rocker panels that have been on the Jeep since before I got it and I found this awful patch of rust underneath. From what I can tell the previous owner used bondo really poorly and now it’s coming back to bite me. Any advice on how to take care of this? I...

Hi all. Brand new to Wranglers, and have never inspected a frame in my life. Any specific spots to look out for when purchasing? I have these pictures of what I would consider to be a very clean frame. Would you all agree or are you seeing anything I’m not seeing? Thanks!